DATA SHEET

SE5007BT: 5 GHz Front-End Module with Power Detector

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

202448A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012

1

Applications



5 GHz WLAN (IEEE802.11a/g/n)



Access Points, PCMCIA, PC cards, Handhelds

Features



5GHz Front End Module with PA, LNA and T/R

Switch



Integrated power amplifier enable pin (VEN)



Buffered, temperature compensated power

detector



High and Low-Linearity mode



3% EVM, @17dBm, 64 QAM, 54 Mbps



30 dB Typical Gain



Lead Free and RoHS compliant, halogen free

package



16 pin 3 mm x 3 mm x 0.6 mm QFN, MSL1

Ordering Information

Part Number

Package

Remark

SE5007BT

16 Pin QFN

Samples

SE5007BT-R

16 Pin QFN

Tape and Reel

SE5007BT-

EK1

Evaluation Kit

Standard

Product Description

The SE5007BT is a 5GHz front end module offering

high linear power for wireless LAN applications.

It

incorporates a power detector for control of the output

power.

The SE5007BT offers a high level of integration for a

simplified design, providing quicker time to market

and higher application board production yield.

The

device integrates inter-stage match, a temperature

compensated, load insensitive power detector with

20dB of dynamic range, a 3.8GHz notch filter, a T/R

switch and an Rx LNA.

For wireless LAN applications, the device meets the

requirements

of

IEEE802.11a

and

delivers

approximately 17dBm of linear output power. It also

features a low linearity mode control to reduce current

consumption at low power modes.

The SE5007BT integrates the reference voltage

generator, allowing for a true 1.8V CMOS compatible

digital EN (enable) function to turn the power amplifier

on and off.

Functional Block Diagram

TXIN and ANT are DC Blocked. However external blocking cap is recommended for RX output.

Figure 1: Functional Block Diagram

Match &

Filter

Match

Bias, Enable, Detector Circuits

VCC1,2

EN

TXIN

C0

C1

ANT

RX

H/L Lin

VPD