GaAs SPDT Switch

DC - 3.0 GHz

MASWSS0151

M/A-COM Inc. and its affiliates reserve the right to make changes to the

product(s) or information contained herein without notice. M/A-COM makes

no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does M/A-COM assume any liability

whatsoever arising out of the use or application of any product(s) or

information.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macom.com for additional data sheets and product information.

V5

2

RoHS

Compliant

4

Parameter

Test Conditions

Units

Min.

Typ.

Max.

Insertion Loss

DC - 3.0 GHz

dB

—

0.65

0.8

Isolation

DC - 1.0 GHz

1.0 - 2.0 GHz

2.0 - 3.0 GHz

dB

dB

dB

29

—

—

31

25

21

—

—

—

Return Loss

DC - 1.5 GHz

1.5 - 3.0 GHz

dB

dB

—

—

22

20

—

—

P1dB

1 GHz

dBm

—

31

—

IP2

Two Tone, 10 dBm / Tone, 900 MHz, 5 MHz Spacing

dBm

—

81

—

IP3

Two Tone, 10 dBm / Tone, 900 MHz, 5 MHz Spacing

dBm

—

55

—

2nd Harmonic

2.4 GHz, Pin = +20 dBm

dBc

—

-70

—

3rd Harmonic

2.4 GHz, Pin = +20 dBm

dBc

—

-60

—

Ton, Toff

50% control to 90% RF, 50% control to 10% RF

nS

—

20

—

Trise, Tfall

10% to 90% RF, 90% to 10% RF

nS

—

10

—

Control Current

μA

—

5

10

4.

For positive voltage control, external DC blocking capacitors are required on all RF ports.

Truth Table

5,6

V1

V2

RFC-RF1

RFC-RF2

1

0

0

1

Off

On

On

Off

5.

Differential voltage, V (state 1) - V (state 0), must be +2.1 V

minimum and must not exceed 5 V.

6.

0 = -5 V to 0 V, 1 = -2.9 V to 5 V.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

Lead-Free SC70 (SOT-363)

†

†

Reference Application Note M538 for lead-free solder reflow

recommendations.