16

sensing.honeywell.com

PX2 Series

ADDITIONAL INFORMATION

The following associated literature is available at

sensing.honeywell.com:

• Product line guide

• Product part listing/nomenclature tree

• Product range guide

• Technical Information:

– Total Error Band Specification for Honeywell Heavy Duty

Pressure Transducers, PX2 Series

• Datasheet

• Application information

• Product installation instructions

WARRANTY/REMEDY

Honeywell warrants goods of its manufacture as being free of

defective materials and faulty workmanship. Honeywell’s standard

product warranty applies unless agreed to otherwise by Honeywell

in writing; please refer to your order acknowledgement or consult

your local sales office for specific warranty details. If warranted

goods are returned to Honeywell during the period of coverage,

Honeywell will repair or replace, at its option, without charge

those items it finds defective.

The foregoing is buyer’s sole

remedy and is in lieu of all other warranties, expressed or

implied, including those of merchantability and fitness for

a particular purpose. In no event shall Honeywell be liable

for consequential, special, or indirect damages.

While we provide application assistance personally, through our

literature and the Honeywell website, it is up to the customer to

determine the suitability of the product in the application.

Specifications may change without notice. The information we

supply is believed to be accurate and reliable as of this issue;

however, we assume no responsibility for its use.

WARNING

PERSONAL INJURY

DO NOT USE

these products as safety or emergency stop

devices or in any other application where failure of the product

could result in personal injury.

Failure to comply with these instructions could result in

death or serious injury.

WARNING

MISUSE OF DOCUMENTATION

• The information presented in this datasheet is for reference

only. Do not use this document as a product installation

guide.

• Complete installation, operation, and maintenance

information is provided in the instructions supplied with

each product.

Failure to comply with these instructions could result in

death or serious injury.

CAUTION

PRODUCT DAMAGE

• Ensure torque specifications are determined for the

specific application. Values provided are for reference

only. NPT ports are not specified with torque values.

Correct installation is based on the number of Turns

From Finger Tight (TFFT). (Mating materials and thread

sealants can result in significantly different torque values

form one application to the next.)

• When using NPT ports in stainless steel manifolds, use a

thread sealant with anti-seize properties to prevent thread

galling. Ensure the sealant is rated for the application.

• Use appropriate tools (such as an open ended wrench or

deep well socket) to install transducers.

• Always hand-start transducers into the hole to prevent

cross threading and damage

Failure to comply with these instructions may result in

product damage.