ST2000DM006 datasheet(10/38 Pages) SEAGATE

10 / 38 page

Seagate BarraCuda Product Manual, Rev. A

www.seagate.com

Drive Specifications

All specifications above are based on native configurations.

One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity.

Accessible capacity may vary depending on operating environment and formatting.

***

During periods of drive idle, some offline activity may occur according to the S.M.A.R.T.

specification, which may increase acoustic and power to operational levels.

†

Seagate does not recommend operating at sustained case temperatures above 60°C.

Operating at higher temperatures will reduce useful life of the product.

Temperature gradient

20°C per hour max (operating)

30°C per hour max (non-operating)

Relative humidity

5% to 95% (operating)

5% to 95% (non-operating)

Relative humidity gradient (max)

30% per hour

Wet bulb temperature (max)

26°C max (operating)

29°C max (non-operating)

Altitude, operating

–304.8m to 3048m

(–1000 ft to 10,000+ ft)

Altitude, non-operating

(below mean sea level, max)

–304.8m to 12,192m

(–1000 ft to 40,000+ ft)

Operational shock (max)

80 Gs at 2ms

Non-operational shock (max)

300 Gs at 2ms

350 Gs at 2ms

Vibration, operating

2Hz to 22Hz: 0.25 Gs, Limited displacement

22Hz to 350Hz: 0.50 Gs

350Hz to 500Hz: 0.25 Gs

Vibration, non-operating

5Hz to 22Hz: 3.0 Gs

22Hz to 350Hz: 3.0 Gs

350Hz to 500Hz: 3.0 Gs

Drive acoustics, sound power

Idle***

2.4 bels (typical)

2.6 bels (max)

2.2 bels (typical)

2.3 bels (max)

Seek

2.6 bels (typical)

2.7 bels (max)

2.3 bels (typical)

2.4 bels (max)

Non-recoverable read errors

1 per 1014 bits read

Annualized Failure Rate (AFR)

<1.0% based on 2400 POH

Rated Workload

Average annualized workload rating: <55 TB/year.

The AFR specification for the product assumes the I/O workload does not exceed the average

annualized workload rate limit of 55 TB/year. Workloads exceeding the annualized rate may

degrade the product AFR and impact reliability as experienced by the particular application.

The average annualized workload rate limit is in units of TB per calendar year.

Warranty

To determine the warranty for a specific drive, use a web browser to access the following web

page: http://www.seagate.com/support/warranty-and-replacements/

From this page, click on “Is my Drive under Warranty”. Users will be asked to provide the drive

serial number, model number (or part number) and country of purchase. The system will

display the warranty information for the drive.

Load/Unload cycles (25°C, 50% rel. humidity)

300,000

----

Contact start-stop cycles (25°C, 50% rel. humidity)

----

50,000

Supports Hotplug operation per the

Serial ATA Revision 3.2 specification

Yes

Table 1

Drive specifications summary for 3TB, 2TB, 1TB and 500GB models (continued)

Drive Specification*

ST3000DM008 &

ST3000DM009

ST2000DM006 &

ST2000DM007

ST1000DM010

ST500DM009

ST2000DM006 Datasheet(PDF) 10 Page - Seagate Technology LLC

ST2000DM006 Datasheet(HTML) 10 Page - Seagate Technology LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38

Datasheet Download

Link URL