CS44600 datasheet(49/76 Pages) CIRRUS

49 / 76 page

DS633F1

CS44600

7.3

Clock Configuration and Power Control (address 02h)

7.3.1

Enable SYS_CLK Output (EN_SYS_CLK)

Default = 1

Function:

This bit enables the driver for the SYS_CLK signal. If the SYS_CLK output is unused, this bit should be

set to ‘0’b to disable the driver.

7.3.2

SYS_CLK Clock Divider Settings (SYS_CLK_DIV[1:0])

Default = 00

Function:

These two bits determine the divider for the XTAL clock signal for generating the SYS_CLK signal. During

a reset condition, with the RST input pin held low, the logic level on the MUTE input pin will determine the

divider used for the SYS_CLK output. If MUTE is pulled low, the SYS_CLK divider will be set to divide

the clock frequency on XTI by a factor of 1. If the MUTE pin is pulled high, the SYS_CLK output will be

set to perform a divide-by-2 on the XTI clock. The state of the MUTE pin will be latched on the rising edge

of the RST. The MUTE pin can then be used as defined.

7.3.3

PWM Master Clock Divider Settings (PWM_MCLK_DIV[1:0])

Default = 00

Function:

These two bits determine the divider for the XTAL clock signal for generating the PWM_MCLK signal.

7.3.4

Power Down XTAL (PDN_XTAL)

Default = 0

0 - Crystal Oscillator Circuit is running.

1 - Crystal Oscillator Circuit is powered down.

Function:

This bit is used to power down the crystal oscillator circuitry when not being used. When using a clock

signal attached to the XTI input, this bit should be set to ‘1’b.

EN_SYS_CLK SYS_CLK_DIV1 SYS_CLK_DIV0

PWM_MCLK_DIV1

PWM_MCLK_DIV0 PDN_XTAL PDN_OUTPUT_MODE PDN

SYS_CLK_DIV[1:0]

SYS_CLK Clock Divider

Use state of MUTE input pin following RST

condition

Divide by 2

Divide by 4

Divide by 8

PWM_MCLK_DIV[1:0]

PWM Master Clock

Divider

Divide by 1

Divide by 2

Divide by 4

Divide by 8

CS44600 Datasheet(PDF) 49 Page - Cirrus Logic

CS44600 Datasheet(HTML) 49 Page - Cirrus Logic

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

Datasheet Download

Link URL