STO-0620300-R-E1

www.eravant.com | 424-757-0168 | support@eravant.com

Copyright © 2024 by Eravant

1/4

Advanced Rev 1.5

D-Band VNA Frequency Extender, Receive (Rx) Module,

9.17 to 14.17 GHz Input

STO-0620300-R-E1 is a compact D-Band vector network analyzer (VNA)

frequency extender receive (Rx) module that extends lower frequency

VNA signals to 110 to 170 GHz. It is compatible with modern vector

network analyzers such as Rohde & Schwarz ZNA, Anritsu VectorStar

™,

Keysight PNA-X Series, and Copper Mountain CobaltFx. The VNA needs

dual sources to be extended. This frequency extender can be used to

measure one-path transmission (S21 or S12) through DUT when paired

with compatible transmitter. When Rx module is paired with Tx/Rx

module, the setup can be used to measure reflection at input of DUT and

transmission through DUT. An AC to DC Power adapter and Proxi-

Flange

™ Contactless Flanges (STQ-WG-06010-FB-CF and STQ-WG-

06025-FB-CF), are included. The Eravant calibration kit (STQ-TO-06-S1-

CKIT1) and Wave-Glide

™ Rail System (STQ-TL-RW-S10-M1) are

highly recommended to complete the D-Band VNA test set. VNA

extender is packaged individually in a rugged equipment box with

additional hardware and tools.

Electrical Specifications:

Parameter

Minimum

Typical

Maximum

Frequency Range

110 GHz

170 GHz

Input Attenuation Control Range

30 dB

Test Port Input Power (Damage)*

+10 dBm

Dynamic Range** @ 10 Hz BW

100 dB

Test Port Match

20 dB

LO Source Input Frequency (RF

±IF)

9.17 GHz

14.17 GHz

LO Source Input Power

0 dBm

+3 dBm

+6 dBm

IF Frequency Range

10 MHz

1000 MHz

Multiplication Factor

12

Specification Temperature

+20°C

+30°C

Operating Temperature

0°C

+50°C

ECCN

•

3A001.b.7

FEATURES

•

Full Band Coverage

•

Dynamic Range of 1000 dB

•

AC Power Input: 100 to 240 VAC

APPLICATIONS

•

VNA Frequency Extension

•

OTA Measurements

•

Test Lab Instrumentation

Recommended Pairing

•

Cal Kit: STQ-TO-06-S1-CKIT1

•

Waveguide-Glide

™ Rail System

•

Waveguide Quick Connects

•

Cable: SCW-SMSM040-F1-A-PM

Recommended Pairing

•

Contactless WG Flange & mmWave

THz Test Set Up Applications

•

VNA Extender Configuration Guide

•

VNA Extenders and Cal Kits

*Max input power is specified when attenuation level is minimum. Increasing

attenuation level will increase power handling.

**Measured with compatible Tx/Ref or Tx/Rx module