The Embedded I/O Company

TPCE200

PCI Express Carrier for 4 IndustryPack

® Modules

TPCE200-10R

Application Information

The TPCE200 is a standard height PCI Express, Revision

2.0 compatible module that provides four slots for up to

four single-size or two double-size IndustryPack (IP)

modules used to build modular, flexible and cost effective

I/O solutions for all kinds of applications like process

control, medical systems, telecommunication and traffic

control.

The TPCE200 is a versatile solution to upgrade well

known IP I/O solutions to the PCI Express signalling

standard.

Four 50-pin 0.1 inch flat ribbon cable connectors provide

access to all IP I/O lines. LED status indicators for IP

acknowledge, +5V and ±12V are provided.

The IP clock speed is selectable between 8MHz and

32MHz for each IP slot separately.

One memory space is provided for each IP, allowing linear

addressing for 16-Bit memory on the IP.

The IP power lines are fuse protected by self-healing

fuses and RF filtered. The operating temperature range is

-40°C to +85°C.

The PCIe edge card connector provides +12V and +3.3V.

The TPCE200-10R uses the +12V of the PCIe edge card

connector to generate all power supply voltages for the IP

slots (+5V, +12V and -12V).

According to the PCIe specification, a PCIe x1 card is

limited to 6W on the +12V which allows to operate most of

the

available

IP

modules

in

combination

on

the

TPCE200-10R.

For increased power requirements, the TPCE200-11R

offer a PCIe Graphics Power Connector to supply the

+12V for generating all the power supply voltages for the

IP slots providing power of up to 25W.

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.0.1

2017-08-31

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com