5

5 - 102

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

Item

Description

J1 - J2

PCB Mount SMA RF Connector

J3 - J4

DC Pin

C1

10000 pF Capacitor, 0402 Pkg.

C2

10000 pF Capacitor, 0060 Pkg.

L1

22nH Inductor, 0402 Pkg.

L2

18nH Inductor, 0603 Pkg.

U1

HMC372LP3 / HMC372LP3E Amplifier

106722 Eval Board

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

Evaluation PCB

The circuit board used in the final application

should use RF circuit design techniques. Signal

lines should have 50 ohm impedance while the

package ground leads and exposed paddle should

be connected directly to the ground plane similar

to that shown. A sufficient number of VIA holes

should be used to connect the top and bottom

ground planes. The evaluation circuit board shown

is available from Hittite upon request.

GaAs PHEMT MMIC LOW NOISE

AMPLIFIER, 700 - 1000 MHz

v02.0605