Power

■ PSUs: 2 redundant, load-sharing, hot-swappable AC

■ Input Voltage: 100 to 240 VAC at 50-60 Hz

■ Power Consumption: 150 Watts maximum

Regulatory

■ EN 55032:2015+AC:2016, Class A

■ EN 61000-3-2:2014, Class A

■ EN 61000-3-3:2013

■ FCC Class A

■ VCCI Class A

■ CCC GB 9254-2008, Class A

■ BSMI Class A, CNS 13438

■ IEC 61000-4-2/3/4/5/6/8/11

■ EN 55024:2010+A1:2015

■ EN 55035:2017

■ UL (UL 62368-1 & CSA C22.2 No. 62368-1)

■ CB (IEC/EN 60950-1, IEC/EN 62368-1)

■ CCC GB4943.1-2011

■ BSMI, CNS 14336-1

Warranty

Please check www.edge-core.com for the warranty terms in your

country.

For More Information

To find out more about Edgecore Networks Corporation products

and solutions, visit www.edge-core.com.

About Edgecore Networks Corporation

Edgecore Networks Corporation is in the business of providing

innovative network solutions. In the service provider network, in the

data center or in the cloud, Edgecore Networks Corporation delivers

the soſtware and systems that transform the way the world

connects. Edgecore Networks Corporation serves customers and

partners worldwide. Additional information can be found at

www.edge-core.com.

Edgecore Networks Corporation is a subsidiary of Accton

Technology Corporation, the leading network ODM company. The

Edgecore data center switches are developed and manufactured by

Accton.

To purchase Edgecore Networks solutions, please contact your

Edgecore Networks Corporation representatives at +886 3 563 8888

(HQ) or +1 (949)-336-6801 or authorized resellers.

© Copyright 2023 Edgecore Networks Corporation. The information contained herein

is subject to change without notice. This document is for informational purposes only

and does not set forth any warranty, expressed or implied, concerning any

equipment, equipment feature, or service offered by Edgecore Networks Corporation.

Edgecore Networks Corporation shall not be liable for technical or editorial errors or

omissions contained herein.

Ports

■ Switch Ports:

48 x 10/100/1000BASE-T RJ-45 ports

4 x 10G/25G SFP28 uplink ports

2 x 100G QSFP28 stacking ports (requires NOS to support

hardware stacking feature)

• Note: When a DAC cable is used in a topology, a link issue may be

encountered if the CR4 Auto-Negotiation/Link Training does not turn

on. This can be solved by manually enabling CR4 Auto

Negotiation/Link Training.

■ Management Ports:

1 x RJ-45 serial console

1 x RJ-45 100/1000BASE-T management port

1 x Type-A USB storage port

■ Supported Transceivers and Cables:

10GBASE-RJ-45

10G-DAC/AOC Cable

25GBASE-SR/LR

25G-DAC/AOC Cable

40GBASE-SR4/LR4

40G-DAC/AOC Cable

100GBASE-SR4/CWDM4/LR4

100G-DAC/AOC Cable

• Note: More optics and detailed cabling information can be found at

www.edge-core.com.

Key Components

■ Switch Silicon: Broadcom BCM56371 Trident III 480 Gbps

■ CPU: Intel Atom/Denverton C3558 4-cores 2.2 GHz x86 processor

■ DDR4: 8 GB x 2 SO-DIMM

■ SPI Flash: 16 MB x 2

■ m.2 SSD: 32 GB MLC

■ TPM 1.2 with LPC Interface: ST33ZP24AR28PVSP, ST

Performance

■ Switchibg Capacity: 348 Gbps

■ Forwarding Rate: 744 Mpps

■ MAC Addresses: 16K min./112K max.

■ VLAN IDs: 4K

■ Jumbo Frames: Up to 12,288 bytes

■ Packet Buffer Size: 8 MB Integrated packet buffer memory

LEDs

■ GE RJ-45 SFP+ Port LEDs: Link Status, Activity

■ SFP28 Port LEDs: Port LEDs: Link Speed, Link Status, Activity

■ Ethernet Management Port LED: Link Status, Activity

■ System LEDs: PRI, PSU1, PSU2, STK1, STK2, FAN

Physical and Environmental

■ Dimensions (WxDxH): 43.8 x 47.4 x 4.4 cm (17.24 x 18.66 x 1.73 in)

■ Weight: 6.98 kg (15.39 lb), with two installed PSUs

■ Operating Temperature: 0°C to 45°C (32°F to 113°F)

■ Storage Temperature: -40°C to 70°C (-40°F to 158°F)

■ Operating Humidity: 5% to 95% non-condensing

Soſtware

■ Switch is loaded with Open Network Install Environment (ONIE)

soſtware installer

■ Compatible with the following NOS options: open source

options, plus commercial NOS offerings.

EPS201

Enterprise Switch