LMP7711

SNOSAP4F – SEPTEMBER 2005 – REVISED MAY 2013

www.ti.com

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

ABSOLUTE MAXIMUM RATINGS

(1) (2)

ESD Tolerance(3)

Human Body Model

2000V

Machine Model

200V

Charge-Device Model

1000V

VIN Differential

±0.3V

Supply Voltage (VS = V

+ – V−)

6.0V

Voltage on Input/Output Pins

V+ +0.3V, V−

−0.3V

Storage Temperature Range

−65°C to 150°C

Junction Temperature(4)

+150°C

Soldering Information

Infrared or Convection (20 sec)

235°C

Wave Soldering Lead Temp. (10 sec)

260°C

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating ratings indicate conditions for

which the device is functional, but do not ensure specific performance limits. Electrical Characteristics state electrical specifications

under particular test conditions which ensure specific performance limits. This assumes that the device is within the Operating Ratings.

Specifications are not ensured for parameters where no limit is given, however, the typical value is a good indication of device

performance.

(2)

If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and

specifications.

(3)

Human Body Model, applicable std. MIL-STD-883, Method 3015.7. Machine Model, applicable std. JESD22-A115-A (ESD MM std. of

JEDEC) Field-Induced Charge-Device Model, applicable std. JESD22-C101-C (ESD FICDM std. of JEDEC).

(4)

The maximum power dissipation is a function of TJ(MAX), θJA. The maximum allowable power dissipation at any ambient temperature is

PD = (TJ(MAX) - TA)/θJA. All numbers apply for packages soldered directly onto a PC Board.

OPERATING RATINGS

(1)

Temperature Range(2)

−40°C to 125°C

Supply Voltage (VS = V

+ – V−)

0°C

≤ TA ≤ 125°C

1.8V to 5.5V

−40°C ≤ TA ≤ 125°C

2.0V to 5.5V

Package Thermal Resistance (

θJA

(2))

6-Pin SOT

170°C/W

10-Pin VSSOP

236°C/W

(1)

Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating ratings indicate conditions for

which the device is functional, but do not ensure specific performance limits. Electrical Characteristics state electrical specifications

under particular test conditions which ensure specific performance limits. This assumes that the device is within the Operating Ratings.

Specifications are not ensured for parameters where no limit is given, however, the typical value is a good indication of device

performance.

(2)

The maximum power dissipation is a function of TJ(MAX), θJA. The maximum allowable power dissipation at any ambient temperature is

PD = (TJ(MAX) - TA)/θJA. All numbers apply for packages soldered directly onto a PC Board.

2

Submit Documentation Feedback

Copyright © 2005–2013, Texas Instruments Incorporated

Product Folder Links: LMP7711