T/H

8-BIT

SUCCESSIVE

APPROXIMATION

ADC

SCLK

CS

SDATA

CONTROL

LOGIC

VIN

ADC081S101

SNAS310D – JANUARY 2006 – REVISED JANUARY 2014

www.ti.com

Block Diagram

PIN DESCRIPTIONS AND EQUIVALENT CIRCUITS

Pin No.

Symbol

Description

ANALOG I/O

3

VIN

Analog input. This signal can range from 0V to VA.

DIGITAL I/O

4

SCLK

Digital clock input. This clock directly controls the conversion and readout processes.

5

SDATA

Digital data output. The output samples are clocked out of this pin on falling edges of the SCLK pin.

6

CS

Chip select. On the falling edge of CS, a conversion process begins.

POWER SUPPLY

Positive supply pin. This pin should be connected to a quiet +2.7V to +5.25V source and bypassed to

1

VA

GND with a 1 µF capacitor and a 0.1 µF monolithic capacitor located within 1 cm of the power pin.

2

GND

The ground return for the supply and signals.

PAD

GND

For package suffix CISD(X) only, it is recommended that the center pad should be connected to ground.

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

2

Submit Documentation Feedback

Copyright © 2006–2014, Texas Instruments Incorporated

Product Folder Links: ADC081S101