Datasheet

Lighted Touch Button with Bipolar Outputs

• Excellent immunity to false triggering by water spray, detergents, oils, and other foreign materials

• Rugged, cost-effective, and easy-to-install touch button with multicolor light

• Latching versions start up not activated and toggle between activated and not activated on

successive touches

• Waterproof IP69K per DIN 40050-9 construction for washdown environments

• Ergonomically designed to eliminate hand, wrist, and arm stresses associated with repeated switch

operation; requires no physical force to operate

• Can be actuated with bare hands or gloves

• 12 V DC to 30 V DC operation

• Five color options available

• Terminal connection models available for panel wiring applications

Models

Family

K30

G = Green

Blank = Momentary

R = Red

Y = Yellow

B = Blue

H = Power activates Color 1. Touch

changes bipolar output state

and activates Color 2.

W = White

X = Not Used

G

R

L

H

Color 1

Not Activated

Color 2

Activated

Output

Function

Function

A = Normally Open

A

Blank = 2 m Integral Cable

Q = Integral 5-pin M12 Quick

Disconnect (QD) *

QP = 150 mm (5.9 in) cable with

5-pin M12 Quick

Disconnect (QD) *

T = Terminal Screws

Q

Connection

* QD model requires mating cordset

T2 = Touch

T2

Activation

Method

Output

State

R = Normally Closed

L = Latching

B = Bipolar Output

(NPN & PNP)

B

Output

Type

Sample Model

Description

K30ALBT2GRH

Normally open output state, latching output function with bipolar output and two touch activation method. Color 1: Green (not activated), Color 2: Red

(activated). Power activates color 1. Touch changes bipolar output state and activates color 2. Two-meter integral cable connection.

K30ABT2XGHT

Normally open output state, momentary output function with bipolar output. Color 1: None, Color 2: Green (activated). Touch changes bipolar output state and

activates color 2. Terminal screws.

K30RBT2RGHQ

Normally closed output state, momentary output function with bipolar output. Color 1: Red (not activated), Color 2: Green (activated). Touch changes bipolar

output state and activates color 2. Integral 5-pin M12 quick disconnect connection.

Wiring Diagrams

Load

Load

3

1

2

4

5

12-30V dc

Not Used

–

+

Color Key

1 = Brown

2 = White

3 = Blue

4 = Black

5 = Gray

Note: Cabled wiring diagrams are shown. Quick disconnect wiring diagrams are functionally identical.

EZ-LIGHT® Touch Gen 2 K30 Series Illuminated

Buttons

Original Document

189826 Rev. F

30 April 2021

189826