5 Specifications

5.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1) (2)

MIN

MAX

UNIT

Differential input voltage

±Supply Voltage

Voltage at input/output pin

(V–) – 0.3

(V+) + 0.3

V

VS

Supply voltage, VS = (V+) – (V–)

16

V

Current at input pin(3)

–5

5

mA

Current at output pin(4) (5)

–30

30

mA

Current at power supply pin

40

mA

TJ

Junction temperature(6)

150

°C

TSTG

Storage temperature

–65

150

°C

Lead temperature (soldering, 10 sec)

260

°C

(1)

Operation outside the Absolute Maximum Ratings may cause permanent device damage. Absolute Maximum Ratings do not imply

functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions.

If used outside the Recommended Operating Conditions but within the Absolute Maximum Ratings, the device may not be fully

functional, and this may affect device reliability, functionality, performance, and shorten the device lifetime.

(2)

If military- or aerospace-specified devices are required, contact the TI Sales Office or Distributors for availability and specifications.

(3)

Limiting input pin current is only necessary for input voltages that exceed absolute maximum input voltage ratings.

(4)

Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result

in exceeding the maximum allowed junction temperature of 150°C. Output currents in excess of ±30mA over a long term can adversely

affect reliability.

(5)

Do not short circuit output to V+, when V+ is greater than 13V or reliability is adversely affected.

(6)

The maximum power dissipation is a function of TJ(max), RθJA, and TA. The maximum allowable power dissipation at any ambient

temperature is PD = (TJ(max) − TA) / θJA. All numbers apply for packages soldered directly into a printed circuit board (PCB).

5.2 ESD Ratings

VALUE

UNIT

LMC6482

V(ESD)

Electrostatic discharge

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±1500

V

LMC6484

V(ESD)

Electrostatic discharge

Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)

±2000

V

(1)

JEDEC document JEP155 states that 500V HBM allows safe manufacturing with a standard ESD control process.

5.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

MIN

NOM

MAX

UNIT

VS

Supply voltage, VS = (V+) – (V–)

3

15.5

V

TJ

Junction temperature

–40

85

℃

LMC6482

LMC6484

SNOS674J – OCTOBER 1997 – REVISED SEPTEMBER 2024

www.ti.com

4

Submit Document Feedback

Copyright © 2024 Texas Instruments Incorporated

Product Folder Links: LMC6482 LMC6484