M41T83RM6F datasheet(51/64 Pages) STMICROELECTRONICS

51 / 64 page

DocID012578 Rev 19

51/64

M41T82, M41T83

DC and AC parameters

This section summarizes the operating and measurement conditions, as well as the dc and

ac characteristics of the device. The parameters in the following DC and AC Characteristic

tables are derived from tests performed under the measurement conditions listed in the

relevant tables. Designers should check that the operating conditions in their projects match

the measurement conditions when using the quoted parameters.

Figure 26. Measurement AC I/O waveform

Table 19. Operating and AC measurement conditions

Parameter(1)

1. Output Hi-Z is defined as the point where data is no longer driven.

M41T8x

Supply voltage (VCC)

2.38 V to 5.5 V

Ambient operating temperature (TA)

–40 to 85 °C

Load capacitance (CL)

50 pF

Input rise and fall times

≤ 5 ns

Input pulse voltages

0.2 VCC to 0.8 VCC

Input and output timing ref. voltages

0.3 VCC to 0.7 VCC

Table 20. Capacitance

Symbol

Parameter(1)(2)

1. Effective capacitance measured with power supply at 3.6 V; sampled only, not 100% tested.

2. At 25 °C, f = 1 MHz

Min

Max

Unit

CIN

Input capacitance

COUT

(3)

3. Outputs deselected

Output capacitance

tLP

Low-pass filter input time constant (SDA and SCL)

AI02568

0.8VCC

0.2VCC

0.7VCC

0.3VCC

M41T83RM6F Datasheet(PDF) 51 Page - STMicroelectronics

M41T83RM6F Datasheet(HTML) 51 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Datasheet Download

Link URL