Page 3 of 4

13.50-14.50 GHz

2.5-Watt Power Amplifier

CMM1434-SM

Pin Functional Diagram

Vdd 1

GROUND 2

RF IN 3

GROUND 4

Vgg 5

10 Vdd

9 GROUND

8 RF OUT

7 GROUND

6 Vgg

Physical Dimensions (Bottom View)

Vgg

RF IN

1

2

3

4

5

10

9

8

7

6

Vdd

RF OUT

F

1

.

0

F

1

.

0

Vgg

Vdd

50

50

Recommended Application Circuit

Note: This schematic represents the topology of the application circuit

recommended by Mimix.

Note: Due to the high gain of this device it is highly recommended to maintain the

reverse isolation (S12) above 50 dB.

Biasing Notes

1. Dual bias is required

2. 0.1 F bypass capacitors are needed on PC board as close as possible to pins

1, 5, 6 and 10.

3. Positive (+) bias can be applied either at pin 1 or pin 6.

4. Negative (-) bias can be applied either at pin 5 or pin 6.

5. No DC block is required at RF IN/OUT.

6. Negative (-) bias must be applied before applying positive (+) bias.

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099

Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com

Characteristic Data and Specifications are subject to change without notice.

©2007 Mimix Broadband, Inc.

Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept

their obligation to be compliant with U.S. Export Laws.

ORIENTATION MARK

August 2007 - Rev 16-Aug-07