 |
Electronic Components Datasheet Search |
|
|
Electronic Components Datasheet Search |
|
ND005D-SM02-R Datasheet(PDF) 11 Page - Superior Sensors Technology. |
|
|
|||||||||||||||||||||||||||||
ND005D-SM02-R Datasheet(HTML) 11 Page - Superior Sensors Technology. |
|
|
11 / 18 page  ND Series Industrial Middle Pressure Sensors www.SuperiorSensors.com 11 10.6 Control Registers 10.6.1 Mode Control Register Default Value: 0xF3 Details of the Mode Control register are illustrated in the figure to the right. Bits 0-2 control the output pressure range. Bit 3 is the I/O Watchdog Enable bit. When set, the I/O watchdog is enabled. When enabled, the I/O watchdog will monitor the I/O activity. If I/O activity is not detected for the I/O Watchdog timeout time, the pressure sensor will reset itself. The I/O watchdog timeout time is determined by the currently active bandwidth setting. Bits 4-6 control the BW Limit Filter. Bit 7 is the Notch Filter Enable bit. When enabled, the 50/60Hz notch filter is active. Please note the available pressure ranges for the different sensor models are indicated in the table. For values where the pressure range is not available for the given sensor (high or low), the table is highlighted in light orange and indicates the given full scale value to use for pressure conversion. It is possible to use these values. It should also be noted that upon changing the Mode Control value, there is a one cycle latency before the new Mode Control value becomes valid. That is, the data of the communication cycle following a change to the Mode Control register will not reflect the change. It is not until the second communication cycle that the change in the Mode Control register will be reflected in the output data. b7 b6 b5 b4 b3 b2 b1 b0 Pressure Range Select I/O Watchdog Enable BW Limit Select Notch Enable Mode Register (General) b7 b6 b5 b4 b3 b2 b1 b0 Mode Register (Detail) 0 0 0 0 0 1 0 1 0 0 1 1 1 0 0 1 0 1 1 1 0 1 1 1 Disabled 0 0 0 0 0 1 0 1 0 0 1 1 1 0 0 1 0 1 1 1 0 1 1 1 0 1 1.0 Hz 2.0 Hz 5.0 Hz 10 Hz 20 Hz 50 Hz 100 Hz 200 Hz Notch Filter Disabled Notch Filter Enabled BW Limit Select Notch Enable Mode Control Register Detail Pressure Range Select (by Model) 1 sec 500 ms 200 ms 200 ms 200 ms 200 ms 200 ms I/O Watchdog Timeout 0 1 Enabled I/O Watchdog Enable 200 ms ND005D 0.5 psi 0.5 psi 0.8 psi 1.0 psi 2.0 psi 4.0 psi 5.0 psi 0.5 psi ND015D 1.0 psi 1.0 psi 2.0 psi 4.0 psi 5.0 psi 10.0 psi 15.0 psi ND030D 5.0 psi 5.0 psi 10.0 psi 15.0 psi 20.0 psi 25.0 psi 30.0 psi 5.0 psi ND060D 10.0 psi 10.0 psi 15.0 psi 20.0 psi 30.0 psi 40.0 psi 50.0 psi ND100D 40 psi 50 psi 60 psi 70 psi 80 psi 90 psi 100 psi ND150D 50 psi 50 psi 60 psi 75 psi 100 psi 125 psi 150 psi 50 psi 1.0 psi 60.0 psi 40 psi |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
New Zealand ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
