NF-40

NAH,NAC,NAM,NAP series

Mounting Plate

Terminal cover

2-Protection Earth

6-M4

2-f4.8

Name Plate

¶

Tolerance : ±1 [±0.04]

¶

Weight : 300g max

¶

Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04]

¶

Case : PBT

¶

Dimensions in mm, [ ]=inches

¶

Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) max

Output

Terminal

Input

Terminal

Output

Terminal

Mounting Hole

Input

Terminal

82 ±0.5

77

92

Terminal cover

¶

Closed the terminal cover

8

27

(2.5)

[0.1]

[3.62]

[3.23]

[0.19]

[3.03]

[1.06]

[0.31]

As this product is adopted push-down type terminal block, this appearance is as follows.

1

The terminal cover is retracted inside the unit.

2

The screws for connecting the terminals are held in the up right position.

¡Note when installing the EMI/EMC

Filter on a DIN rail.

When the EMI/EMC Filter is grounded through

the DIN rail, the proper noise attenuation may not

be achieved.

Be sure to connect the protection earth (PE) of

the EMI/EMC Filter body to the earth.

It can connect the ground to either one only.

6-M4

Name Plate

Output

Terminal

Output

Terminal

(11)

92

77

¶

Tolerance : ±1 [±0.04]

¶

Weight : 300g max

¶

Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 [0.04]

¶

Case : PBT

¶

Dimensions in mm, [ ]=inches

¶

Terminal block screw tighting torque M4:1.6N-m (16.9kgf-cm) max

(2.5)

8

27

2-Protection Earth

Mounting Plate

Terminal cover

DIN rail

Input

Terminal

Input

Terminal

Terminal cover

¶

Closed the terminal cover

[0.1]

[3.62]

[0.43]

[3.03]

[1.06]

[0.31]

Standard Type

DIN rail installation Type

Name Plate

DIN rail

External view