M2N68-LA (Narra 3)

17

9. System panel connector (10-1 pin F_PANEL)

This connector supports several chassis-mounted functions.

M2N68-LA

M2N68-LA System panel connector

F_PANEL

HDLED RESET

PWR LED PWR BTN

•.. System power LED (2-pin PLED)

This 2-pin connector is for the system power LED. Connect the chassis power

LED cable to this connector. The system power LED lights up when you turn

on the system power, and blinks when the system is in sleep mode.

•.

Hard disk drive activity LED (2-pin HDLED)

This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity

LED cable to this connector. The IDE LED lights up or flashes when data is

read from or written to the HDD.

•.

ATX power button/soft-off button (2-pin PWR)

This connector is for the system power button. Pressing the power button

turns the system on or puts the system in sleep or soft-off mode depending

on the BIOS settings. Pressing the power switch for more than four seconds

while the system is ON turns the system OFF.

•.

Reset button (2-pin RESET)

This 2-pin connector is for the chassis-mounted reset button for system

reboot without turning off the system power.