84 / 242 page
Taking Measurements
Operation
332
Figure 318:The Measure Menu and Active Measurements
Use the measure menu to perform the following tasks.
Activate a Measurement
Use this procedure to activate a measure
ment for the selected waveform.
1. Press the main menu button Select Measrmnt for....
2. If necessary, press the lowermost side menu button (labeled -more- x
outof6) to page through the available measurements until the measure
ment you want to take appears in the side menu.
3. Then press one of the top four side menu buttons to activate a particular
measurement.
The measured values appear to the left of the side menu, as shown in Figure
318. For definitions of the available measurements, see Table 31.
NOTE
Measurements only remain active while the channel is active. If you
activate several measurements for a channel and then press the
WAVEFORM OFF button, the measurements disappear just like the
waveform.
New Zealand ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
