STR71XF_08 datasheet(55/78 Pages) STMICROELECTRONICS

55 / 78 page

STR71xF

Electrical parameters

55/78

RSTIN pin

The RSTIN pin input driver is CMOS. A permanent pull-up is present which is the same as

as RPU (seeTable 29 on page 50)

Subject to general operating conditions for V33 and TA unless otherwise specified.

Notes:

Data based on characterization results, not tested in production.

2) Data guaranteed by design, not tested in production.

Figure 24.

Recommended RSTIN pin

protection.1)

Notes:

The RPU pull-up equivalent resistor is based on a resistive transistor (corresponding IPU current

characteristics described in Figure 18).

The reset network protects the device against parasitic resets.

The user must ensure that the level on the RSTIN pin can go below the VIL(RSTINn) max. level specified in

Table 31. Otherwise the reset will not be taken into account internally.

Table 31.

RESET pin characteristics

Symbol

Parameter

Conditions

Min

Typ 1)

Max

Unit

VIL(RSTINn) RSTIN Input low level voltage 1)

0.8

VIH(RSTINn) RSTIN Input high level voltage 1)

VF(RSTINn) RSTIN Input filtered pulse2)

500

VNF(RSTINn) RSTIN Input not filtered pulse2)

1.2

µs

0.01

µF

V33

0.01

µF

EXTERNAL

RESET

CIRCUIT

4.7k

Ω

Required

Recommended

STR7X

Filter

RPU

V33

INTERNAL RESET

V33

RSTIN

STR71XF Datasheet(PDF) 55 Page - STMicroelectronics

STR71XF Datasheet(HTML) 55 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78

Datasheet Download

Link URL