© IGS Version V1

+44 (0)1635 294606 | info@i-led.co.uk | https://i-led.co.uk

Intelligent LED Solutions, Unit 2, Berkshire Business Centre,

Berkshire Drive, Thatcham, Berkshire, RG19 4EW

A division of Intelligent Group Solutions Ltd

3 of 11

PRODUCT OPTIONS

ILS Part Number

IR centroid

wavelength

Radiant intensity IF = 1 A ,

tp = 10 ms

Forward Voltage

Radiance Angle

Relevant Stanley

LED Data

ILR-IN01-85SL-LEDIL-SC221.

850nm

1150mW/sr

3.15-3.5V

±25° (50°)

SFH4717AS

ILR-IO01-85SL-LEDIL-SC221.

850nm

900mW/sr

3.15-3.4V

±40° (80°)

SFH4715AS

ILR-IW01-85SL-LEDIL-SC221.

850nm

350mW/sr

3.15-3.4V

±75° (150°)

SFH4716AS

ILR-IN01-94SL-LEDIL-SC221.

940nm

1150mW/sr

2.9-3.4V

±25° (50°)

SFH4727AS

ILR-IO01-94SL-LEDIL-SC221.

940nm

900mW/sr

2.9-3.4V

±40° (80°)

SFH4725AS

ILR-IW01-94SL-LEDIL-SC221.

940nm

350mW/sr

2.9-3.4V

±75° (150°)

SFH4726AS

Due to the special conditions of the manufacturing processes of LEDs, the typical data of technical parameters can only reflect overall statistical figures, and do not

necessarily correspond to the actual parameters of each single product, which could differ from the typical data.

Tolerance +/- 10%

Measured with 10mS 1000mA pulse at 25˚C

MINIMUM AND MAXIMUM RATINGS

ILS Part Number

Operating Temperature at

Tc-Point [˚C]

Storage

Temperature [˚C]

Forward Current per chip [mA]

Reverse Voltage [Vdc]

ILR-IN01-85SL-LEDIL-SC221.

-40 °C ~ 125 °C

-40 °C ~ 125 °C

10-1500mA

5V

ILR-IO01-85SL-LEDIL-SC221.

-40 °C ~ 125 °C

-40 °C ~ 125 °C

10-1500mA

5V

ILR-IW01-85SL-LEDIL-SC221.

-40 °C ~ 125 °C

-40 °C ~ 125 °C

10-1500mA

5V

ILR-IN01-94SL-LEDIL-SC221.

-40 °C ~ 125 °C

-40 °C ~ 125 °C

10-1500mA

5V

ILR-IO01-94SL-LEDIL-SC221.

-40 °C ~ 125 °C

-40 °C ~ 125 °C

10-1500mA

5V

ILR-IW01-94SL-LEDIL-SC221.

-40 °C ~ 125 °C

-40 °C ~ 125 °C

10-1500mA

5V

Exceeding maximum ratings for operating and storage temperature will reduce expected life time or destroy the LED module.

Exceeding maximum ratings for operating voltage will cause hazardous overload and will likely destroy the LED module.

The temperature of the LED module must be measured at the Tc-Point according to EN60598-1 in a thermally constant status with a temperature sensor or a temperature

sensitive label.