GAMEWELL-FCI

12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118

Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.

©2007 by Honeywell International Inc. All rights reserved.

www.gamewell-fci.com

9021-60292 Rev. A page 1 of 2

Flex Series

GWF402 and

GWF404

2 and 4 Zone Conventional

Fire Alarm Control Panels

SIGNALING

S521

MEA

Approve

d

366-04-E 7165-1288:180

An ISO 9000-2000 Company

Description

The Flex 402 is a two zone fire alarm control panel (FACP)

and the Flex 404 is a four zone FACP. These control pan-

els provide reliable fire signaling protection for small to

medium sized retail, office, multi-family, or other similar

commercial or institutional building.

Initiating device circuits (IDCs) for Flex Series panels are

power limited and operate in Style B (Class B). Each panel

is compatible with conventional input devices such as two-

wire smoke detectors, four-wire smoke detectors, pull sta-

tions, water flow devices, tamper switches and other nor-

mally-open contact devices. This includes System Sensor

features like drift compensation, maintenance alert and

freeze warning. (See Device Compatibility Document PN

52195 for a listing of compatible devices.)

Outputs include one notification appliance circuit (NAC) on

the Flex 402 and two NACs on the Flex 404. NACs are

power limited and operate in Style Y (Class B). Each FACP

has a Form-C Alarm and Trouble relay and 24 VDC special

applications resettable power. In addition, the Flex 404 has

a Form-C Supervisory relay and a special application non-

resettable power output. The FACP supervises wiring, AC

voltage and battery level.

Activation of a compatible smoke detector or any normally-

open fire alarm initiating device will activate audible and

visual signaling devices, illuminate an indicating LED,

sound the piezo sounder at the FACP, activate the FACP

alarm relay and operate and optional modules used to

notify a remote station or initiate an auxiliary control

function.

Both the Flex 402 and Flex 404 fire alarm control panels

are listed to UL

Features

•

Flex 402: Two Style B (Class B) IDC zones, one Style Y

(Class B) NAC

•

Flex 404: Four Style B (Class B) IDC zones, two Style Y

(Class B) NACs

•

Optional NAC Class A converter module (Flex 404)

•

NAC synchronization and programmability features:

- ADA compliant strobe synchronization

- ANSI audible signals as required by NFPA 72

- Silence inhibit, auto-silence, non-silenceable

- Selective Silence: mute horns, keep strobes lit

- Temporal or steady signal

•

Silent or audible walk test from front keypad

•

Zone disable, alarm verification selectable per zone

•

Controls: Acknowledge, Alarm, Silence, Reset,

Walktest, Zone enable/disable

•

LED indicators: Alarm, Supervisory, Maintenance,

Trouble (one per zone): AC, NAC / Zone disable, NAC

fault, System / Power Trouble, Walktest, Alarm Silence,

Charger / Battery / Earth Fault (on pcb)

•

Alarm verification

•

Low AC voltage sense, automatic battery charger

•

Piezo sounder for alarm, trouble, and supervisory

GWF402 (left) and GWF404 (right)