| Electronic Components Datasheet Search |
|
JS1224 Datasheet(PDF) 3 Page - Clarke International |
|
|
|||||||||||||||||||||||||||||
JS1224 Datasheet(HTML) 3 Page - Clarke International |
|
3 / 16 page ![]() 3 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com GENERAL SAFETY RULES 1. ALWAYS ensure when jumpstarting that there is air circulating around the machine. 2. NEVER allow the negative and positive leads on this unit, to touch each other or to touch the same metal object. 3. Although the jumpstart is water resistant and may be used outdoors, DO NOT leave it exposed to the elements. Avoid direct sunlight, direct heat, rain/moisture etc. 4. The JS1224 can be used with either 12 or 24V systems. 5. DO NOT operate the jumpstart if any of the cables are damaged. Consult your CLARKE dealer for repair or replacement of the parts. 6. DO NOT operate the jumpstart if the case is damaged. Consult your CLARKE dealer or a qualified person for inspection and repair. 7. Ensure the vehicle battery posts and battery clamps are perfectly clean before use. 8. When connecting the jumpstart leads to a battery, ensure the ON/OFF switch is OFF, and ALWAYS connect the RED, (positive’+’) output conductor to the UNEARTHED (+) battery terminal FIRST, then connect the BLACK, (negative) conductor to a suitable earthing point on the chassis, well away from any fuel lines. 9. To prevent battery overheating and consequent damage, DO NOT exceed our recommendations for duration of jump starting. 10. ALWAYS wear suitable protective clothing and eye protection when working with lead acid batteries. 11. The jumpstart is NOT designed to be used as a replacement for a vehicle battery. 12. DO NOT attempt to BOOST CHARGE the jumpstart’s sealed battery. 13. NEVER allow the battery to become completely discharged. 14. NEVER jump start the engine whilst the jumpstart is being charged. 15. NEVER allow the cables to become wrapped around the operator or any other person. 16. NEVER attempt any repairs yourself. If you have a problem with the machine contact your local CLARKE dealer. 17. ALWAYS keep body and clothing dry. Never work in damp area without adequate insulation against electric shock. |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |