4

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

Ensure the press and its components suffered no damage during transit and

that all components are present. Should any loss or damage become

apparent, please contact your CLARKE dealer immediately.

IMPORTANT: Due to the weight of the press components, we recommend

that you get assistance during assembly.

IMPORTANT: We strongly recommend that the press be firmly secured to a

firm and level floor using expansion bolts (not supplied). Holes are provided

in the base supports for this purpose.

IMPORTANT: Do not locate your press where it will be open to the elements,

as severe weather conditions will damage the hydraulic parts.

1. Attach the feet and the bottom

cross member to the side

supports, using the nuts, bolts and

washers.

2. Add the stay bars to each side

and bolt into place.

3. Bolt one of the cross beams to the

side supports, Attach the ram

baseplate to the cross beam,

securing it with the socket

headed bolt.

4. Add the other cross beam by

sliding it along the ram baseplate

from one end.

5. Assemble loosely before

tightening all the bolts at each

end with both spring and flat washers. Position the ram baseplate centrally

and lock in position.

6. With the help of an assistant, lift the frame assembly upright and

manoeuvre it to its intended location in the workshop.