5

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

OPERATION

1. Unscrew the handle and pump

assembly and fill the container

with the desired liquid.

2. Screw the handle and pump

assembly back on firmly.

3. Release the carrying lugs from the

pump body by twisting the handle

anticlockwise.

4. Pressurise the container by

pumping the handle.

5. Squeeze the trigger to begin

spraying. When the spray

weakens, pump the handle to re-

pressurise the container.

6. Push the trigger down and

forward to lock in position to

maintain a constant spray without

needing to hold the trigger. Slide

the trigger back to release.

7. Adjust the width of the spray by

twisting the tip of the nozzle.

8. If leaks or poor delivery are experienced, always check the connections.

9. Push the pump handle downward and twist left or right to engage the

carrying lugs in the cap when lifting the unit.

AFTER USE

After use, the sprayer should be flushed thoroughly with clean water to avoid

the possibility of blockages from product residue, or any cross-contamination

between different products.

Store in a cool place out of reach of children.

If not used for long periods or used continuously for several days, add a light

smear of vaseline to the sealing washers and moving parts to reduce wear

and assist free movement.

Always release any pressure before storage.