ACTR2 datasheet(3/3 Pages) ACT

3 / 3 page

Tel

+44 118 979 1238

Fax :

+44 118 979 1283

Email: info@actcrystals.com

In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.

ISO9001: 2000 Registered

Registration number 6830/2

For quotations or further information please contact us at:

3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK

http://www.actcrystals.com

5 - 3 Solderability

Solderability

Dipping terminals into Methanol (JIS-K-501)

of rosin(JIS-K-5902) Then, into molten

solder at 230+5

°C for 3+0.5°C seconds

More than 95

℅ of

the terminal

surface should be

covered in smooth

solder

CAUTION: Electrostatic Sensitive Device. Observe precautions for handling!

The centre frequency, fC, is measured at the minimum IL point with the resonator in the 50 Ω test system.

Unless noted otherwise, case temperature TC = +25°C±2°C.

Frequency aging is the change in fC with time and is specified at +65°C or less. Aging may exceed the

specification for prolonged temperatures above +65°C. Typically, aging is greatest the first year after

manufacture, decreasing in subsequent years.

Derived mathematically from one or more of the following directly measured parameters: f C, IL, 3 dB

bandwidth, fC versus TC, and C0.

The specifications of this device are subject to change or obsolescence without notice.

Typically, equipment utilizing this device requires emissions testing and government approval, which is the

responsibility of the equipment manufacturer.

Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications,

processes and circuits implemented within components or assemblies.

Issue : 1 C1

Date : SEPT 04

ACTR2 Datasheet(PDF) 3 Page - Advanced Crystal Technology