Supply Current (max)

Iop

Rise & Fall Time (max)

TrTf

Jitter

@10Hz

@100Hz

@1kHz

@10kHz

@100kHz

Dimensions (mm)

Phase Noise

311.040 MHz, 312.500 MHz,400.00MHz, 622.080MHz, 625.00MHz

-98dBc/Hz

-125dBc/Hz

-130dBc/Hz

-135dBc/Hz

Topr

Tstg

VDD -1.025Vdc min

800pS max

http://www.actcrystals.com

The ACT MPX11-6 is a PCB Based, SMD, LVPECL Saw oscillator. This 14 x10.3mm device can be

used in a wide range of applications, especially where a high fundamental frequency with low phase

noise and jitter are required. This device is offered in a range of standard, frequencies from

311.04~625.0 MHz, common to communications applications.( SONET / SDH etc.. ) The devices ar

available reeled ( 500 pcs ) or loose to suit high/low volume requirements.

Please specify

In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice

ISO9001:2000 Registered

For quotations or further information please contact us at:

3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK

Please note that all parameters can not necessarily be specified in the same device

Customer to specify : Frequency, Frequency Stability, Operating Temperature Range,

Specification

Tel :

0044 (0)118 979 1238

Fax :

0044 (0)118 979 1283

email :

info@actcrystals.com

ACTMPX11-6 LVPECL Saw Oscillator

Parameter

Tw/t

fo

Δf/fo

Supply Voltage

Frequency Range

Symbol

-55 to +125°C

Aging

N/CL

Fa

VDD-2.0Vdc to 50 ohm

Output Load

Frequency Stability

±25ppm ~ ±50ppm

Output Level ‘0’

Temp Operating Range

Temp Storage Range

0 ~ +70°C Std

( -40 ~ +85°C available)

VOL

45/55%

Duty Cycle

Output Level ‘1’

VOH

VDD

130mA max

VDD-1.620Vdcmax

Condition

Please specify

Please specify

3.3VDC ± 10%

Specification

12kHz to 20MHz

1.0pS max

-65dBc/Hz

@25°C

±3ppm / year

Tri-state

N/C

Ground

Output

Complementary Output

Vdd

#1

#2

#3

#4

#5

#6

Pin Connection

Pad surface material Au

1 of 3