AS7038RB datasheet(108/127 Pages) AMSOSRAM

108 / 127 page

Document Feedback

AS7038RB

Functional Description

Datasheet

• PUBLIC

DS000726

• v2-00 • 2021-Jun-02

126

│ 107

Interrupts

An interrupt output pin INT can be used to interrupt the host. Following interrupt sources are possible:

irq_adc: End of ADC conversion

irq_sequencer: End of sequencer sequence reached.

irq_ltf: A light-to-frequency conversion is finished.

irq_adc_threshold: ADC threshold triggered

– see ADC Threshold.

irq_fifothreshold: FIFO almost full (as defined in bit fifo_threshold)

irq_fifooverflow: FIFO overflow (error condition, data is lost)

irq_clipdetect: TIA output and/or SD output exceeded threshold

– see details in CLIPSTATUS

irq_led_supply_low: led supply low comparator triggered

– see details in LEDSTATUS

Depending on the setting in register INTENAB each of the above interrupt source can assert INT

output pin (active low).

7.2

I2C

The AS7038RB includes an I²C slave using an I²C address of 0x30 (7-bit format; R/W bit has to be

added) respectively 60 h (8-bit format for writing) and 61 h (8-bit format for reading). It expects

external pull-up resistors.

7.2.1

I2C Serial Interface

I2C Feature List

●

Fast mode (400 kHz) and standard mode (100 kHz) support

●

7+1-bit addressing mode

●

Write formats: Single-Byte-Write, Page-Write

●

Read formats: Current-Address-Read, Random-Read, Sequential-Read

●

SDA input delay and SCL spike filtering by integrated RC-components

AS7038RB Datasheet(PDF) 108 Page - ams-OSRAM AG

AS7038RB Datasheet(HTML) 108 Page - ams-OSRAM AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL