19

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

RESPIRATOR CARE & MAINTENANCE

The respirator must be used together with the correct particle filter at all times.

The particle filter can not be cleaned. DO NOT attempt to remove

contamination using for example, compressed air, as this will destroy the filters,

which will not give the expected protection and the warranty will be

invalidated.

DO NOT store outside the temperature range -5oC to +55oC or in relative

humidity greater than 90%. The filter must be kept clean from dust and large

particles.

NOTE: Markings

The particle filters are marked according to EN12941:1998+Al:2003+A2:2008,

EU2016/425.

TH3P RSL: Class TH3, protection against Particulate, SL = particles of liquid or

solid material in aerosol form.

FILTER REPLACEMENT

Push down on the cover until it clicks into position as shown. Lift the top cover

and remove the filter.

FILTER INSTALLATION

1. Blower body

2. HEPA Filter

3. Foam prefilter

4. Filter screen

5. Cover

Attention: Filter screen and

foam pre-filter protects

increases the life of the

particle filter HFS-2000.