| Electronic Components Datasheet Search |
|
MPC8349 Datasheet(PDF) 73 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MPC8349 Datasheet(HTML) 73 Page - Freescale Semiconductor, Inc |
|
73 / 88 page ![]() MPC8349E PowerQUICC™ II Pro Integrated Host Processor Hardware Specifications, Rev. 10 Freescale Semiconductor 73 Thermal 20 Thermal This section describes the thermal specifications of the MPC8349E. 20.1 Thermal Characteristics Table 59 provides the package thermal characteristics for the 672 35 × 35 mm TBGA of the MPC8349E. 20.2 Thermal Management Information For the following sections, PD = (VDD × IDD) + PI/O where PI/O is the power dissipation of the I/O drivers. See Table 5 for I/O power dissipation values. 20.2.1 Estimation of Junction Temperature with Junction-to-Ambient Thermal Resistance An estimation of the chip junction temperature, TJ, can be obtained from the equation: TJ = TA + (RθJA × PD) Table 59. Package Thermal Characteristics for TBGA Characteristic Symbol Value Unit Notes Junction-to-ambient natural convection on single-layer board (1s) RθJA 14 °C/W 1, 2 Junction-to-ambient natural convection on four-layer board (2s2p) RθJMA 11 °C/W 1, 3 Junction-to-ambient (@ 200 ft/min) on single-layer board (1s) RθJMA 11 °C/W 1, 3 Junction-to-ambient (@ 200 ft/min) on four-layer board (2s2p) RθJMA 8 °C/W 1, 3 Junction-to-ambient (@ 2 m/s) on single-layer board (1s) RθJMA 9 °C/W 1, 3 Junction-to-ambient (@ 2 m/s) on four-layer board (2s2p) RθJMA 7 °C/W 1, 3 Junction-to-board thermal RθJB 3.8 °C/W 4 Junction-to-case thermal RθJC 1.7 °C/W 5 Junction-to-package natural convection on top ψJT 1 °C/W 6 Notes: 1. Junction temperature is a function of die size, on-chip power dissipation, package thermal resistance, mounting site (board) temperature, ambient temperature, air flow, power dissipation of other components on the board, and board thermal resistance. 2. Per SEMI G38-87 and JEDEC JESD51-2 with the single-layer board horizontal. 3. Per JEDEC JESD51-6 with the board horizontal, 1 m/s is approximately equal to 200 linear feet per minute (LFM). 4. Thermal resistance between the die and the printed-circuit board per JEDEC JESD51-8. Board temperature is measured on the top surface of the board near the package. 5. Thermal resistance between the die and the case top surface as measured by the cold plate method (MIL SPEC-883 Method 1012.1). 6. Thermal characterization parameter indicating the temperature difference between package top and the junction temperature per JEDEC JESD51-2. When Greek letters are not available, the thermal characterization parameter is written as Psi-JT. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |