2023/10/12 10:58

DFRobot Monochrome_0.96_128x64_IIC_SPI_OLED_Display_SKU_DFR0650

https://wiki.dfrobot.com/Monochrome_0.96_128x64_IIC_SPI_OLED_Display_SKU_DFR0650

10/25

try this example.

Please go to u8g2wiki for more fonts. There are many good-looking icons, multi-language words, etc.

/*!

* @file Font.ino

* @brief Show several U8G2-supported fonts

* @n U8G2 supports multiple fonts, and this demo is just a few fonts to display

* @n U8G2 Font GitHub https://github.com/olikraus/u8g2/wiki/fntlistall

*

* @copyright

Copyright (c) 2010 DFRobot Co.Ltd (https://www.dfrobot.com)

* @licence

The MIT License (MIT)

* @author [Ivey](Ivey.lu@dfrobot.com)

* @version

V1.0

* @date

2019-11-29

* @get from https://www.dfrobot.com

* @url https://github.com/DFRobot/U8g2_Arduino

*/

#include <Arduino.h>

#include <U8g2lib.h>

//#include <SPI.h>

#include <Wire.h>

/*

* Display hardware IIC interface constructor

*@param rotation

：U8G2_R0 Not rotate, horizontally, draw direction from left to right

U8G2_R1 Rotate clockwise 90 degrees, drawing direction from top to bottom

U8G2_R2 Rotate 180 degrees clockwise, drawing in right-to-left directions

U8G2_R3 Rotate clockwise 270 degrees, drawing direction from bottom to top

U8G2_MIRROR Normal display of mirror content (v2.6.x version used above)

Note: U8G2_MIRROR need to be used with setFlipMode().

*@param reset

：U8x8_PIN_NONE Indicates that the pin is empty and no reset pin is used

* Display hardware SPI interface constructor

*@param

Just connect the CS pin (pins are optional)

*@param

Just connect the DC pin (pins are optional)

*