www.panduit.com

specifications

8-position, industrial plug shall be applicable for use in manufacturing as well as

other industrial environments. The product shall meet or exceed the component

requirements of the ANSI/TIA-568-C.2 Category 6 and Category 5e, ISO 11801

Class E and Class D, and ODVA Ethernet/IP^, PROFINET, and CC-Link

standards. It shall also meet the channel requirements of ANSI/TIA-568-C.2

Category 6A and ISO 11801 2nd Edition Class EA in a 4-connector configuration

up to 100 meters at swept frequencies up to 500MHz when installed with other

Panduit Category 6A components. The RJ45 plug shall be constructed of zinc

die cast housing with 360° shielding and shall include a dust cap. The plug

shall incorporate an ingress protection rating of IP20 and offer an extended

temperature range as required for more demanding applications. The plug shall

be capable of termination to either a 2-pair or 4-pair solid or stranded twisted pair

copper cable.

IndustrialNet™ Category 6A RJ45

Field Terminable Plug

applications

IndustrialNet™ Category 6A RJ45 Field Terminable

Plug provides an ideal solution to support Industrial

Ethernet from the Local Area Network (LAN) based

support offices to the processing devices on the

plant floor, for applications up to and including

10GBASE-T Ethernet. A key component to an

overall industrial Ethernet application, the plug is the

interface that protects the integrity of the Ethernet

data transfer from the switch or PLC out to the

devices, or up to the horizontal plant backbone.

Constructed of a robust die cast housing and fully

shielded, the plug is ideal for use in high noise

(EMI/RFI) environments. Field attachable for on-site

termination allows quick installation. The extended

temperature range -40°C to 85°C (-40°F to 185°F) is

ideal for use in more demanding applications such

as manufacturing facilities where temperature

extremes are the norm.

technical information

Electrical/

mechanical performance:

Exceeds channel and patch cord requirements of ANSI/TIA-568-C.2

Category 6 and Category 5e, and ISO 11801 Class E and Class D

standards at swept frequencies up to 250MHz and 100MHz respectively

and conforms to ODVA Ethernet/IP^, PROFINET and CC-Link electrical

and mechanical performance requirements when installed with other

Panduit components.

Meets the channel requirements of ANSI/TIA-568-C.2 Category 6A and

ISO 11801 2nd Edition Class EA in a 4-connector configuration up to 100

meters at swept frequencies up to 500MHz when installed with other

Panduit Category 6A components.

UL/IEC compliance:

Meets UL 1863 and IEC 60603-7-51

IP compliance:

Rated IP20

RoHS compliancy status:

Compliant

PoE compliance:

Meets IEEE 802.3af and IEEE 802.3at for PoE applications

Temperature rating:

-40°C to 85°C (-40°F to 185°F) operating and storage

Wiring scheme:

T568A/T568B

Conductor

termination range:

ISPS688FA: Solid 24/1-22/1 AWG, 0.020 in.-0.025 in. (0.51mm-0.64mm);

Stranded 27/7-22/7 AWG, 0.018 in.-0.030 in. (0.46mm-0.76mm);

Stranded 24/19-22/19 AWG, 0.024 in.-0.031 in. (0.61mm-0.78mm)

ISPS688FAS: Solid 26/1-24/1 AWG, 0.016 in.-0.020 in.

(0.41mm-0.51mm); Stranded 27/7-24/7 AWG, 0.018 in.-0.024 in.

(0.46mm-0.61mm); Stranded 26/19 AWG, 0.020 in. (0.51mm)

Insulation

termination range:

ISPS688FA: 1.0 – 1.6mm (0.039 – 0.063 in.)

ISPS688FAS: 0.85 – 1.0mm (0.033 – 0.039 in.)

Cable jacket

diameter range:

5.0 – 9.0mm (0.197 – 0.354 in.)

Packaging:

1 unit per PE bag, 10 units per carton

key features and benefits

Robust construction

Zinc die cast housing with 360° shielding and full metal shielding between

wire pairs; secure data transmission in high noise (EMI/RFI) environments;

dust cap protection; three strain relief settings (cable diameters 5.0mm to

9.0mm)

Field attachable

Can be assembled in 60 seconds; Knipex parallel jaw pliers,

part number 86 03 250, required

Extended

temperature range

-40°C to 85°C (-40°F to 185°F)

SPECIFICATION SHEET

*To designate color, add suffix TL (Teal), BL (Black), RD

(Red), BU (Blue) GY (Gray), or YL (Yellow).

**For other lengths, change the length designation (1M)

of the part number to the desired length (0.3M, 0.6M, 2M,

3M, 5M, or 10M); to designate color, replace TL (Teal)

suffix with BL (Black), RD (Red), or YL (Yellow). For

example, the part number of a 2-meter teal patch cord is

ISTPHCH2MTL.

***For standard colors other than Off White, replace IW

in part number with BL (Black), EI (Electric Ivory), IG

(International Gray), or WH (White).

^EtherNet/IP is a trademark of ODVA.

^^To designate color other than Red, add suffix BL (Black),

BU (Blue), YL (Yellow), GR (Green), OR (Orange), IW

(Off White) or IG (International Gray) at the end of the

part number. 10/package.

+To designate color other than IW (Off White), replace IW

with EI (Electric Ivory), IG (International Gray), BL (Black),

BU (Blue), RD (Red), YL (Yellow), GR (Green), OR

(Orange), or VL (Violet) in the part number. 100/package.

IndustrialNet ™ Category 5e Shielded

600 V-Rated Patch Cords

CM/CMX outdoor: **ISTPHCH1MTL

IndustrialNet ™ M12 D-Code to RJ45

Panel Mount Adapter

Panel mount adapter: ICAM12DRJS

Mini-Com® Modular Patch Panel

8-port:

CDPP8RG

DIN Rail Adapter

1-port:

CADIN1IW***

Tools and Accessories

Wire map

termination tool:

Kniplex 860325010" pliers

Jack module

termination tool: EGJT or TGJT

Wire snipping tool: CWST

Wire stripping tool: CJAST

Clear dust cap:

MDC-C

Block out device: PSL-DCJB^^

Phone icons:

CIPIW-C+

Data icons:

CIDIW-C+

IndustrialNet ™ Category 6A/6/5e RJ45

Field Terminable Plug for cables with 1.0-

1.6mm (0.039-0.063 in.) insulation diameter

Plug:

ISPS688FA

Replacement wire

manager:

ISPS688FA-WM

IndustrialNet™ Category 6A/6/5e RJ45

Field Terminable Plug for cables with 0.85-

1.0mm (0.033-0.039 in.) insulation diameter

Plug:

ISPS688FAS

Replacement wire

manager:

ISPS688FAS-WM

IndustrialNet ™ Category 5e SF/UTP

Copper Cable

CM

2-pair:

ISFCH5C02A*-XG

4-pair:

ISFCH5C04A*-XG

Flame retardant, halogen-free

2-pair/color Teal:

ISFX5502ATL-LED

2-pair/color Red:

ISFX5502ARD-LED

IndustrialNet ™ Category 5e F/UTP

Copper Cable

CM 4-pair/color Black:IFC5C04BBL-CEG

IndustrialNet ™ Category 5e U/UTP

Copper Cable

CM 4-pair/color Black:IUC5C04ABL-CEG

IndustrialNet ™ Category 6 F/UTP

Copper Cable

CM 4-pair/color Black:IFC6C04BBL-CEG

IndustrialNet ™ Category 6 U/UTP

Copper Cable

CM 4-pair/color Black:IUC6C04ABL-CEG

IndustrialNet ™ Category 6 S/FTP

Copper Cable

Flame retardant, halogen-free

4-pair/color Yellow: ISX6004AYL-LED

4-pair/color Red:

ISX6004ARD-LED

IndustrialNet ™ M12 D-Code Field

Terminable Plug

Field

terminable plug:

ISPS5E44MFA