www.panduit.com/ia

specifications

Industrial patch cords shall be constructed of Category 6A, industrial grade, 26

AWG stranded, twisted 4-pair shielded SF/UTP cable with a flame retardant

(CMR) thermoplastic elastomer (TPE) jacket. Patch cord cable shall be offered

in teal and black colors and lengths for design flexibility. Each patch cord shall

be pre-terminated to include Category 6A RJ45 shielded modular plugs on

each end, with a black strain relief boot, and wired according to the T568B

standard. Each patch cord is designed to support high-flex applications and

is rated for 600V panel or on-machine applications when the space is shared

with high voltage power cables.

IndustrialNet™ Category 6A

600V Patch Cords

SPECIFICATION SHEET

applications

technical information

Electrical/

mechanical performance:

Exceeds channel and component requirements of ANSI/TIA-568-C.2

Category 6A and ISO 11801 Class Ea standards at swept frequencies up to

500MHz; meets ODVA Ethernet/IP electrical and mechanical performance

requirements

FCC and ANSI

compliance:

Meets all applicable ANSI/TIA-968-A requirements; contacts plated with 50

micro-inches of gold for superior performance

IEC compliance:

Meets IEC 60603-7 UL-rated: UL 1863 approved

IP compliance:

Rated IP20

RoHS compliancy status:

Compliant

PoE compliance:

Meets IEEE 802.3af and IEEE 802.3at for PoE+ applications

Other

standard compliances:

UL AWM Style 2463 (80°C 600V) Flex Life Test: 1 million cycles at 10x

cable diameter; 10 million cycles at 20x cable diameter Torsion Life Test:

3 million cycles, 360°

Temperature rating:

-10°C to 60°C (14°F to 140°F) operating;

-40°C to 70°C (-40°F to 158°F) storage

Wiring scheme:

T568B

Cable jacket diameter:

7.4 mm (0.29 in.) nominal

Flame rating:

CMR (UL1685)

Packaging:

1 unit per polyethylene bag, 10 units per carton

key features and benefits

Robust

600V-rated construction:

Allows for patch runs between automation devices in industrial environments;

rated for 600V panel or on-machine applications when the space is shared with

high voltage power cables; plug contact plated with 50 micro-inches of gold

100% performance tested

for wire map, NEXT, and

return loss:

Factory testing provides confidence that each patch cord delivers

specified performance

Centered

de-embedded plug:

Performs in center of ANSI/TIA-568-C.2 component range, ensuring

interoperability and optimum performance

Integral pair manager:

Optimizes performance and consistency by reducing untwist at the plug

Flexible stranded cable:

26 AWG stranded copper cable with a nominal diameter of 7.4mm (0.29 in.)

allows for high density applications and superior panel cable management

Identification provides

for future traceability:

Identification of performance level, length, and quality control number is

provided on each cord

IndustrialNet™ Patch Cords provide an ideal solution

to support Industrial Ethernet from the Local Area

Network (LAN) based support offices to the

processing devices on the plant floor. The industrial

Ethernet patch cord is a key component to an overall

industrial Ethernet application. The patch cord will be

the interface that protects the integrity of the Ethernet

data transfer from the switch or PLC out to the

devices or up to the horizontal plant backbone. The

patch cord incorporates a durable oil and UV resistant

TPE jacketed cable with modular plugs and is fully

shielded for use in high noise (EMI/RFI) environments.

Key applications include:

• 10BASE-T (Ethernet)

• 100BASE-T (Fast Ethernet)

• 1000BASE-T (Gigabit Ethernet)

• Industrial Ethernet

• Ethernet/IP

• Control Panel deployments featuring power

source voltages

• Uplinks featuring gigabit data transmission

from the control panel to the consolidation point

• High flex applications – Robotic, C-Track

IndustrialNet ™ Category 6A Shielded

600 V-Rated Patch Cords

CM/CMX

:

^ISTPH6X1M**

IndustrialNet ™ Category 6A SF/UTP

Copper Cable

CMR/CMX 4-pair: ISFCH6X04B**-UG

IndustrialNet ™ Category 6/5e

RJ45 Field Terminable Plug

Field

terminable plug:

ISPS688MFA

IndustrialNet ™ M12 X-Code Field

Terminable Plug

Field

terminable Plug:

ISPS6A88MFA

IndustrialNet ™ M12 X-Code to RJ45

Panel Mount Adapter

Panel

mount adapter:

ICAM12DRJS

Mini-Com ® Modular Patch Panel

8-port:

CDPP8RG

DIN Rail Adapter

1-port:

CADIN1IW***

^For other lengths, change the length in the part

number, to the desired length (0.3M, 0.6M, 1M,

1.5M, 2M, 2.5M, 3M, 3.5M, 4M, 4.5M, 5M, 7M,

10M, 15M, or 20M)

**To designate color, add suffix TL (Teal) or

BL (Black)

***For standard colors other than

IG (International Gray), replace suffix with

WH (White), IW (Off White), BL (Black) or

EI (Electric Ivory).