FRDM-HB2000ESEVM datasheet(2/34 Pages) NXP

2 / 34 page

NXP Semiconductors

KTFRDMHB2000ESEVMUG

FRDM-HB2000ESEVM evaluation board

KTFRDMHB2000ESEVMUG

All information provided in this document is subject to legal disclaimers.

User guide

Rev. 2 — 11 June 2018

2 / 34

2 Important notice

NXP provides the enclosed product(s) under the following conditions: This evaluation kit

is intended for use of ENGINEERING DEVELOPMENT OR EVALUATION PURPOSES

ONLY. It is provided as a sample IC pre-soldered to a printed circuit board to make it

easier to access inputs, outputs, and supply terminals. This evaluation board may be

used with any development system or other source of I/O signals by simply connecting

it to the host MCU or computer board via off-the-shelf cables. This evaluation board is

not a Reference Design and is not intended to represent a final design recommendation

for any particular application. Final device in an application will be heavily dependent on

proper printed circuit board layout and heat sinking design as well as attention to supply

filtering, transient suppression, and I/O signal quality.

The goods provided may not be complete in terms of required design, marketing, and

or manufacturing related protective considerations, including product safety measures

typically found in the end product incorporating the goods. Due to the open construction

of the product, it is the user's responsibility to take any and all appropriate precautions

with regard to electrostatic discharge. In order to minimize risks associated with the

customers applications, adequate design and operating safeguards must be provided

by the customer to minimize inherent or procedural hazards. For any safety concerns,

contact NXP sales and technical support services.

Should this evaluation kit not meet the specifications indicated in the kit, it may be

returned within 30 days from the date of delivery and will be replaced by a new kit.

NXP reserves the right to make changes without further notice to any products herein.

NXP makes no warranty, representation or guarantee regarding the suitability of its

products for any particular purpose, nor does NXP assume any liability arising out of the

application or use of any product or circuit, and specifically disclaims any and all liability,

including without limitation consequential or incidental damages. “Typical” parameters

can and do vary in different applications and actual performance may vary over time.

All operating parameters, including “Typical”, must be validated for each customer

application by customer’s technical experts.

NXP does not convey any license under its patent rights nor the rights of others. NXP

products are not designed, intended, or authorized for use as components in systems

intended for surgical implant into the body, or other applications intended to support or

sustain life, or for any other application in which the failure of the NXP product could

create a situation where personal injury or death may occur.

Should the Buyer purchase or use NXP products for any such unintended or

unauthorized application, the Buyer shall indemnify and hold NXP and its officers,

employees, subsidiaries, affiliates, and distributors harmless against all claims, costs,

damages, and expenses, and reasonable attorney fees arising out of, directly or

indirectly, any claim of personal injury or death associated with such unintended or

unauthorized use, even if such claim alleges NXP was negligent regarding the design

or manufacture of the part. NXP and the NXP logo are trademarks of NXP B.V. All other

FRDM-HB2000ESEVM Datasheet(PDF) 2 Page - NXP Semiconductors

FRDM-HB2000ESEVM Datasheet(HTML) 2 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Datasheet Download

Link URL