| Electronic Components Datasheet Search |
|
VIESD1-SIP Datasheet(PDF) 3 Page - CUI INC |
|
|
|||||||||||||||||||||||||||||
VIESD1-SIP Datasheet(HTML) 3 Page - CUI INC |
|
3 / 3 page ![]() Rev. 06-2007 3 / 3 V-Infinity, LLC, 20050 SW 112th Ave., Tualatin, OR 97062 www.v-infinity.com 1-866-372-1258 VIESD1-SIP Series DC-DC Converter Application Notes: - Filtering In some circuits which are sensitive to noise and ripple, a filtering capacitor may be added to the DC/DC output end and input end to reduce the noise and ripple. However, the capacitance of the output filter capacitor must be appropriate. If the capacitance is too big, a startup problem might arise. For every channel of output, providing that safe and reliable operation is ensured, the greatest capacitance of its filter capacitor is shown in the External Capacitor Table. To get an extreme low ripple, an “LC” filtering network may be connected to the input and output ends of the DC/DC converter, which may produce a more significant filtering effect. It should also be noted that the inductance and the frequency of the “LC” filtering network should be staggered with the DC/DC frequency to avoid mutual interference (see figure 1). <Figure 1> DC C L L DC C -Vin +Vin -Vout +Vout - Requirement on Output Load To ensure this module can operate efficiently and reliably, a minimum load is specified for this kind of DC/DC converter in addition to a maximum load (namely full load). During operation, make sure the specified range of input voltage is not exceeded, the minimum output load is not less than 10% of the full load, and that this product should never be operated under no load! If the actual output power is very small, please connect a resistor with proper resistance at the output end in parallel to increase the load, or use our company’s products with a lower rated output power. - Overload protection Under normal operating conditions, the output circuit of these products has no protection against over-current and short-circuits. The simplest method is to connect a self-recovery fuse in series at the input end or add a circuit breaker to the circuit. External Capacitor Table Vin External capacitor Vout External capacitor 5VDC 4.7uF 5VDC 4.7uF 12VDC 2.2uF 9VDC 2.2uF 24VDC 1uF 12VDC 1uF -- -- 15VDC 0.47uF |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |