ST62T10BD1SLASHOTP datasheet(32/104 Pages) STMICROELECTRONICS

Part #	ST62T10BD1/OTP

Description	8-BIT MCUs WITH A/D CONVERTER, TWO TIMERS, OSCILLATOR SAFEGUARD & SAFE RESET

PDF	104 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

32 / 104 page

ST6208C/ST6209C/ST6210C/ST6220C

32/104

6 POWER SAVING MODES

6.1 INTRODUCTION

To give a large measure of flexibility to the applica-

tion in terms of power consumption, two main pow-

er saving modes are implemented in the ST6 (see

Figure 19).

In addition, the Low Frequency Auxiliary Oscillator

(LFAO) can be used instead of the main oscillator

to reduce power consumption in RUN and WAIT

modes.

After a RESET the normal operating mode is se-

lected by default (RUN mode). This mode drives

the device (CPU and embedded peripherals) by

means of a master clock which is based on the

main oscillator frequency.

From Run mode, the different power saving

modes may be selected by calling the specific ST6

software instruction or for the LFAO by setting the

relevant register bit. For more information on the

LFAO, please refer to the Clock chapter.

Figure 19. Power Saving Mode Transitions

POWER CONSUMPTION

WAIT

LFAO

RUN

STOP

High

Low

ST62T10BD1/OTP Datasheet(PDF) 32 Page - STMicroelectronics