Maximum ratings

STM7E1

10/16

Note:

1

All the parameters are valid only with a 75

2

Measured with a 5 V DC voltage applied to a closed switch.

3

Not tested in production.

4

5

Measured with the line connected to GND at one side with a 75

6

During the switching between the main and spare ports, the behavior of the component is

not guaranteed: both main switches can be open (break before make).

7

Measured with the line switching from a 2.5 V DC level (main or spare port) to a -2.5 V DC

level (spare or main port).

Table 10.

Analog part specifications

Symbol

Parameter

Test condition

Value

Unit

Min.

Typ.

Max.

(1)

On-resistance of the main

switches

1.6

2

Ω

(1)

On-resistance of the

auxiliary switches

50

75

Ω

devices

0.5

Ω

switches of the same

device

0.8

Ω

(1,2)

Off-resistance of the main

and auxiliary switches

100

k

Ω

(3)

Capacitance at any switch

pin, switch ON

120

pF

(3)

Capacitance at any switch

pin, switch OFF

40

pF

(1)

Peak amplitude of the

signal at switch pins

-3

3

(1,4)

Frequency of the signal at

switch pins (3dB

bandwidth)

50

12000

kHz

4

8

t

Switch time of the main

switches (a and b)

0.15

1

µs