MP3V5050V

Rev 1, 10/2008

Freescale Semiconductor

Technical Data

MP3V5050V

Sensors

Freescale Semiconductor

1

High Temperature Accuracy

Integrated Silicon Pressure Sensor

On-Chip Signal Conditioned,

Temperature Compensated and

Calibrated

The MP3V5050V sensor integrates on-chip, bipolar op amp circuitry and thin

film resistor networks to provide a high output signal and temperature

compensation. The small form factor and high reliability of on-chip integration

make the Freescale Semiconductor, Inc. pressure sensor a logical and

economical choice for the system designer.

The MP3V5050V piezoresistive transducer is a state-of-the-art, monolithic,

signal conditioned, silicon pressure sensor. This sensor combines advanced

micromachining techniques, thin film metallization, and bipolar semiconductor

processing to provide an accurate, high level analog output signal that is

proportional to applied pressure.

pressure sensor chip.

Features

•

2.5% Maximum Error over 0

° to 85°C

•

Ideally suited for Microprocessor or Microcontroller-Based Systems

•

Temperature Compensated from Over –40

° to +125°C

•

Patented Silicon Shear Stress Strain Gauge

•

Durable Thermoplastic (PPS) Surface Mount Package

•

Easy-to-Use Chip Carrier Option

•

Ideal for Automotive and Non-Automotive Applications

Typical Applications

•

Vacuum Pump Monitoring

ORDERING INFORMATION

Device

Type

Options

Case

No.

MPX Series

Order No.

Packing

Options

Device Marking

Ported

Element

Vacuum,

Axial Port

482A

MP3V5050VC6T1

Tape & Reel MP3V5050V

Ported

Element

Vaccum,

Axial Port

482A

MP3V5050VC6U

Rail

MP3V5050V

MP3V5050V

Series

INTEGRATED

PRESSURE SENSOR

–50 to 0 kPa (–7.25 to 0 psi)

0.12 to 2.8 Volts Output

MP3V5050VC6T1

CASE 482A-01

SMALL OUTLINE PACKAGE

1. Pins 1, 5, 6, 7, and 8 are internal device

connections. Do not connect to external

circuitry or ground. Pin 1 is noted by the

notch in the lead.

1

N/C

5

N/C

2

6

N/C

3

GND

7

N/C

4

8

N/C

Sensing

Element

Thin Film

Temperature

Compensation

and

Gain Stage #1

Gain Stage #2

and

Ground

Reference

Shift Circuitry

GND

Pins 1, 5, 6, 7, and 8 are NO CONNECTS