H8S2245 datasheet(336/818 Pages) RENESAS

336 / 818 page

Section 9 16-Bit Timer Pulse Unit (TPU)

Rev.3.00 Mar. 26, 2007 Page 294 of 772

REJ09B0355-0300

Bits 4 and 3—Clock Edge 1 and 0 (CKEG1, CKEG0): These bits select the input clock edge.

When a both-edges count is selected, a clock divided by two from the input clock can be selected.

(e.g.

φ/4 both edges = φ/2 rising edge). If phase counting mode is used on channels 1, and 2, this

setting is ignored and the phase counting mode setting has priority.

Bit 4

Bit 3

CKEG1

CKEG0

Description

Count at rising edge

(Initial value)

Count at falling edge

—

Count at both edges

Note:

Internal clock edge selection is valid when the input clock is

φ/4 or slower. If φ/1 is selected

as the input clock, this setting is ignored and count at falling edge of

φ is selected.

Bits 2, 1, and 0—Time Prescaler 2, 1, and 0 (TPSC2 to TPSC0): These bits select the TCNT

counter clock. The clock source can be selected independently for each channel. Table 9.4 shows

the clock sources that can be set for each channel.

Table 9.4

TPU Clock Sources

Internal Clock

External Clock

Channel

φφφφ/1

φφφφ/4

φφφφ/16

φφφφ/64

φφφφ/256

φφφφ/1024

TCLKA

TCLKB

TCLKC

TCLKD

Legend:

Setting

Blank: No setting

H8S2245 Datasheet(PDF) 336 Page - Renesas Technology Corp

H8S2245 Datasheet(HTML) 336 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL