Document Number: 26013

For technical questions, contact: dc-film@vishay.com

www.vishay.com

Revision: 06-Oct-08

4

MKT 1813

Metallized Polyester Film Capacitor

MKT Axial Type

Vishay BCcomponents

RECOMMENDED PACKAGING

Note

• Attention: Capacitors with L > 31.5 mm only as bulk available

EXAMPLE OF ORDERING CODE

Note

MOUNTING

Normal Use

The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for

mounting in printed-circuit boards by means of automatic insertion machines.

For detailed tape specifications refer to Packaging information: www.vishay.com/docs/28139/packinfo.pdf or end of catalogue.

Specific Method of Mounting to Withstand Vibration and Shock

In order to withstand vibration and shock tests, it must be ensured that the capacitor body is in good contact with the printed-circuit

board:

• For L ≤ 19 mm capacitors shall be mechanically fixed by the leads

• For larger pitches the capacitors shall be mounted in the same way and the body clamped

• The maximum diameter and length of the capacitors are specified in the dimensions table

• Eccentricity as shown in the drawing below

Space Requirements On Printed-Circuit Board

The maximum length and width of film capacitors is shown in the drawing:

• Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned.

• Product height with seating plane as given by “IEC 60717” as reference: h

Storage Temperature

• Storage temperature: T

Ratings and Characteristics Reference Conditions

Unless otherwise specified, all electrical values apply to an ambient temperature of 23 ± 1 °C, an atmospheric pressure of 86 kPa

to 106 kPa and a relative humidity of 50 ± 2 %.

For reference testing, a conditioning period shall be applied over 96 ± 4 h by heating the products in a circulating air oven at the

rated temperature and a relative humidity not exceeding 20 %.

PACKAGING CODE

TYPE OF PACKAGING

REEL DIAMETER (mm)

ORDERING CODE EXAMPLES

G

AMMO

-

MKT 1813-422-014-G

x

R

REEL

350

MKT 1813-422-014-R

x

-

BULK

-

MKT 1813-422-014

x

TYPE

CAPACITANCE CODE

VOLTAGE CODE

PACKAGING CODE

MKT 1813

410

06

5

G

1 mm