CHINA

SEMICONDUCTOR

Spec. No.

CORPORATION

Rev.

■

■

■

■ Precautions For Use -

1. Recommended Soldering conditions

Wave Soldering

2. Soldering Iron

Basic SPEC. is ≦5sec. When 260℃. If temperature is higher, time should

be shorter (+10℃→ -1sec.). Power dissipation of iron should be smaller than 15W

, and temperature should be controllable. Surface temperature of the device should

be under 230℃.

3. Static Electricity

a. Static electricity or surge voltage damages LEDs..

It is recommended that a wrist band or an anit-electrostatic glove be used

when handling the LEDs.

b. All devices, equipment and machinery must be properly grounded. It is

recommended that mesures be taken against surge voltage to the equipment

that mounts the LEDs.

Page：

5/5

PS-LL-N508SW4-A0

A

Model No：

：

：

：CSLR-N508SW4-A0

Note: The specifications are subject to change without notice. Please contact us for updated information.

http://www.csctw.com.tw

260(max.)

250

240

Time(sec.)

Preheat

105(max.)

0

Max. 60sec.

5 sec.