TLC320AC01C datasheet(39/90 Pages) TI

39 / 90 page

3–1

Specifications

3.1

Absolute Maximum Ratings Over Operating Free-Air Temperature Range

(Unless Otherwise Noted)†

Supply voltage range, DGTL VDD (see Notes 1 and 2)

– 0.3 V to 6.5 V

. . . . . . . . . . . . . . .

Supply voltage range, DAC VDD (see Notes 1 and 2)

– 0.3 V to 6.5 V

. . . . . . . . . . . . . . . .

Supply voltage range, ADC VDD (see Notes 1 and 2)

– 0.3 V to 6.5 V

. . . . . . . . . . . . . . . .

Differential supply voltage range, DGTL VDD to DAC VDD

– 0.3 V to 6.5 V

. . . . . . . . . . . .

Differential supply voltage range, all positive supply voltages to

ADC GND, DAC GND, DGTL GND, SUBS

– 0.3 V to 6.5 V

. . . . . . . . . . . . . . . . . . . .

Output voltage range, DOUT

– 0.3 V to DGTL VDD + 0.3 V

. . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage range, DIN

– 0.3 V to DGTL VDD + 0.3 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ground voltage range, ADC GND, DAC GND,

DGTL GND, SUBS

– 0.3 V to DGTL VDD + 0.3 V

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating free-air temperature range, TA

°C to 70°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range, Tstg

–40

°C to 125°C

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds

260

°C

. . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These

are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated

under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for

extended periods may affect device reliability.

3.2

Recommended Operating Conditions (see Note 2)

MIN

NOM

MAX

UNIT

VDD

Positive supply voltage

4.5

5.5

Steady-state differential voltage between any two supplies

0.1

VIH

High-level digital input voltage

2.2

VIL

Low-level digital input voltage

0.8

Load output current from ADC VMID and DAC

100

µA

Conversion time for the ADC and DAC channels

10 FCLK periods

fMCLK

Master-clock frequency

10.368

MHz

VID(PP)

Analog input voltage (differential, peak to peak)

Differential output load resistance

600

Ω

Single-ended to buffered DAC VMID voltage load resistance

300

Ω

Operating free-air temperature

°C

NOTES:

1. Voltage values for DGTL VDD are with respect to DGTL GND, voltage values for DAC VDD are with respect

to DAC GND, and voltage values for ADC VDD are with respect to ADC GND. For the subsequent electrical,

operating, and timing specifications, the symbol VDD denotes all positive supplies. DAC GND, ADC GND,

DGTL GND, and SUBS are at 0 V unless otherwise specified.

2. To avoid possible damage to these CMOS devices and associated operating parameters, the sequence

below should be followed when applying power:

(1) Connect SUBS, DGTL GND, ADC GND, and DAC GND to ground.

(2) Connect voltages ADC VDD,and DAC VDD.

(3) Connect voltage DGTL VDD.

(4) Connect the input signals.

When removing power, follow the steps above in reverse order.

TLC320AC01C Datasheet(PDF) 39 Page - Texas Instruments

TLC320AC01C Datasheet(HTML) 39 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90

Datasheet Download

Link URL