27 / 77 page
CONEXTOP NEPORT User Manual
Chapter 3 Parameters
3-10
3.8 Serial Settings
3.8.1 Enable Serial Port
parameter
contents
Enable Serial Port
Whether or not enable serial port
Option value: Enable/Disable
Default value: Enable
Table 3-16 enable serial port
Caution:
When the serial port is disabled, then it can not be used to send and receive data, also can not use
the AT commands and serial login capabilities via it.
3.8.2 Port Settings
parame
ter
contents
Protoc
ol
Protocol used in serial port communication.
Option values: RS232/RS422/RS485.
Default value: RS232.
FIFO
Serial port hardware FIFO length.
Option values: 4, 8, 16.
Default value: 8
Flow
Contro
l
Option values: None/Software/Hardware.
Default value: None.
Baud
Rate
Serial port baud rate.
Option values(bps):
110/134/150/300/600/1200/1800/2400/4800/7200/9600/14400/19200/38400/57600/11
5200/230400/460800/921600
Default value: 9600
Data
Bits
Data bits used in serial communication.
Option values(bit):8/7/6/5
Default value:9
Parity
Option values: NONE/ODD/EVEN/MARK/SPACE.
Default value: NONE.
Stop
bits
Option values (bit): 0/1.5/2.
Default value: 0.
New Zealand ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
