Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

M-FIAM3

Rev. 2.4

Page 3 of 6

Set your site on VICOR at vicorpower.com

SPECIFICATIONS (CONT.)

Parameter

H-Grade

M-Grade

Operating temperature

-40°C to +100°C

-55°C to +100°C

Storage temperature

-55°C to +125°C

-65°C to +125°C

Temperature cycling*

12 cycles

12 cycles

-65°C to +100°C

-65°C to +100°C

Ambient test @ 25°C

Yes

Yes

Power cycling burn-in

12 hours, 29 cycles

24 hours, 58 cycles

Functional and parametric ATE tests

-40°C and +100°C

-55°C and +100°C

Hi-Pot test

Yes

Yes

Visual inspection

Yes

Yes

Test data

vicorpower.com

vicorpower.com

ENVIRONMENTAL QUALIFICATION

Altitude

MIL-STD-810F, Method 500.4, Procedure I & II, 40,000 ft. and 70,000 ft. Operational.

Explosive Atmosphere

MIL-STD-810F, Method 511.4, Procedure I, Operational.

Vibration

MIL-STD-810F, Method 514.5, Procedure I, Category 14, Sine and Random vibration per Table 514.5C for Helicopter AH-6J Main Rotor

with overall level of 5.6 G rms for 4 hours per axis. MIL-STD-810F, Method 514.5C, General Minimum Integrity Curve per Figure 514.5C-17

with overall level of 7.7 G rms for 1 hour per axis.

Shock

MIL-STD-810F, Method 516.5, Procedure I, Functional Shock, 40 g. MIL-S-901D, Lightweight Hammer Shock, 3 impacts/axis, 1,3,5 ft.

MIL-STD-202F, Method 213B, 60 g, 9 ms half sine. MIL-STD-202F, Method 213B, 75 g, 11 ms Saw Tooth Shock.

Acceleration

MIL-STD-810F, Method 513.5, Procedure II, table 513.5-II, Operational, 2-7 g, 6 directions.

Humidity

MIL-STD-810F, Method 507.4.

Solder Test

MIL-STD-202G, Method 208H, 8 hour aging.

ENVIRONMENTAL STRESS SCREENING

*Temperature cycled with power off, 17°C per minute rate of change.