AT90SCR100 datasheet(374/433 Pages) ATMEL

374 / 433 page

374

TPR0327AY–SMS–30Jan09

AT90SCR100

3. Keep the AVR core in Power-down sleep mode during periods of low VCC. This will pre-

vent the CPU from attempting to decode and execute instructions, effectively protecting

the SPMCSR Register and thus the Flash from unintentional writes.

28.7.12

Programming Time for Flash when Using SPM

The calibrated RC Oscillator is used to time Flash accesses. Table 28-6 shows the typical pro-

gramming time for Flash accesses from the CPU.

28.7.13

Simple Assembly Code Example for a Boot Loader

;-the routine writes one page of data from RAM to Flash

; the first data location in RAM is pointed to by the Y pointer

; the first data location in Flash is pointed to by the Z-pointer

;-error handling is not included

;-the routine must be placed inside the Boot space

; (at least the Do_spm sub routine). Only code inside NRWW section can

; be read during Self-Programming (Page Erase and Page Write).

;-registers used: r0, r1, temp1 (r16), temp2 (r17), looplo (r24),

; loophi (r25), spmcrval (r20)

; storing and restoring of registers is not included in the routine

; register usage can be optimized at the expense of code size

;-It is assumed that either the interrupt table is moved to the Boot

; loader section or that the interrupts are disabled.

.equ PAGESIZEB = PAGESIZE*2

;PAGESIZEB is page size in BYTES, not words

.org SMALLBOOTSTART

Write_page:

; Page Erase

ldi

spmcrval, (1<<PGERS) | (1<<SPMEN)

call Do_spm

; re-enable the RWW section

ldi

spmcrval, (1<<RWWSRE) | (1<<SPMEN)

call Do_spm

; transfer data from RAM to Flash page buffer

ldi

looplo, low(PAGESIZEB)

;init loop variable

ldi

loophi, high(PAGESIZEB)

;not required for PAGESIZEB<=256

Wrloop:

r0, Y+

r1, Y+

ldi

spmcrval, (1<<SPMEN)

call Do_spm

adiw ZH:ZL, 2

sbiw loophi:looplo, 2

;use subi for PAGESIZEB<=256

brne Wrloop

; execute Page Write

Table 28-6.

SPM Programming Time

Symbol

Min Programming Time

Max Programming Time

Flash write (Page Erase, Page Write, and

write Lock bits by SPM)

3.7 ms

4.5 ms

These programming time are true after production calibration. If the oscillator trim-

ming is modified, these values will be changed.

Note

AT90SCR100 Datasheet(PDF) 374 Page - ATMEL Corporation

AT90SCR100 Datasheet(HTML) 374 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL