ATF22V10C datasheet(3/23 Pages) ATMEL

3 / 23 page

0735T–PLD–5/09

ATF22V10C(Q)

Absolute Maximum Ratings*

Temperature under Bias ................................ -55°C to +125°C

*NOTICE:

Stresses beyond those listed under “Absolute

Maximum Ratings” may cause permanent dam-

age to the device. This is a stress rating only and

functional operation of the device at these or any

other conditions beyond those indicated in the

operational sections of this specification is not

implied. Exposure to absolute maximum rating

conditions for extended periods may affect device

reliability.

Note:

1. Minimum voltage is -0.6V DC, which may under-

shoot to -2.0V for pulses of less than 20 ns.

Maximum output pin voltage is V

CC + 0.75V DC,

which may overshoot to 7.0V for pulses of less

than 20 ns.

Storage Temperature ..................................... -65°C to +150°C

Voltage on Any Pin with

Respect to Ground .........................................-2.0V to +7.0V(1)

Voltage on Input Pins

with Respect to Ground

during Programming .....................................-2.0V to +14.0V(1)

Programming Voltage with

Respect to Ground .......................................-2.0V to +14.0V(1)

DC and AC Operating Conditions

Commercial

Industrial

Military

Operating Temperature (Ambient)

0°C - 70°C

-40°C - 85°C

-55°C - 125°C (case)

VCC Power Supply

5V ± 5%

5V ± 10%

ATF22V10C Datasheet(PDF) 3 Page - ATMEL Corporation