ATmega328P datasheet(165/448 Pages) ATMEL

Part #	ATmega328P

Description	8-bit Microcontroller with 4/8/16/32K Bytes In-System Programmable Flash

PDF	448 Pages

Scroll/Zoom	100%

Manufacturer	ATMEL [ATMEL Corporation]

Direct Link	http://www.atmel.com

Logo

165 / 448 page

165

8161D–AVR–10/09

ATmega48PA/88PA/168PA/328P

The mechanisms for reading TCNT2, OCR2A, OCR2B, TCCR2A and TCCR2B are different.

When reading TCNT2, the actual timer value is read. When reading OCR2A, OCR2B, TCCR2A

and TCCR2B the value in the temporary storage register is read.

17.11.9

GTCCR – General Timer/Counter Control Register

• Bit 1 – PSRASY: Prescaler Reset Timer/Counter2

When this bit is one, the Timer/Counter2 prescaler will be reset. This bit is normally cleared

immediately by hardware. If the bit is written when Timer/Counter2 is operating in asynchronous

mode, the bit will remain one until the prescaler has been reset. The bit will not be cleared by

hardware if the TSM bit is set. Refer to the description of the ”Bit 7 – TSM: Timer/Counter Syn-

chronization Mode” on page 143 for a description of the Timer/Counter Synchronization mode.

Bit

0x23 (0x43)

TSM

–

PSRASY

PSRSYNC

GTCCR

Read/Write

R/W

Initial Value

ATmega328P Datasheet(PDF) 165 Page - ATMEL Corporation