May 2009 - Rev 12-May-09

P9003-MB

Page 5 of 5

1.6 GHz

30W Power Amplifier Module

Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099

Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com

Characteristic Data and Specifications are subject to change without notice.

©2009 Mimix Broadband, Inc.

Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept

their obligation to be compliant with U.S. Export Laws.

Ordering Information

Description

XP9003-MB-0N00

1.6 GHz, 30W Power Amplifier Module

XP9003-MB-EV1

Evaluation Board with SMA Connectors

Handling and Assembly Information

Do not ingest.

Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical

processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed.

Observe government laws and company regulations when discarding this product. This product must be

discarded in accordance with methods specified by applicable hazardous waste procedures.

- Mimix Broadband's products are not authorized for use as critical components in life support

devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As

used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into

the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions

for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical

component is any component of a life support device or system whose failure to perform can be reasonably expected

to cause the failure of the life support device or system, or to affect its safety or effectiveness.

Package Attachment

- This packaged product from Mimix Broadband is provided as a drop-in package and is not

compatible with exposure to reflow soldering processes due to the nature of its internal construction. Mimix will only

support hand-soldering processes for this device. Care should be taken not to apply heavy pressure to the top or tabs to

avoid package damage. Care should be taken to ensure that there are no voids or gaps in the solder connections and

base heat sink so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only

to RF performance degradation, but reduced reliability and life of the product due to thermal stress.

Mimix Lead-Free RoHS Compliant Program -

Mimix has an active program in place to meet customer and governmental

requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix

RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of

our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard

SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes.

CAUTION!

- Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human

body and the environment. For safety, observe the following procedures:

Caution: ESD Sensitive

Appropriate precautions in handling, packaging

and testing devices must be observed.

Proper ESD procedures should be followed when handling this device.