Sealed Tilt Switch

D7E

1

Sealed Tilt Switch

D7E

• Pure mechanical vibration detector

• Sealed enclosure

• Output capacity from 0.1 A at 5 VDC to 100 mA at 30 VDC

• RoHS Compliant

Ordering Information

Characteristics

Operating Angle

Model

50 to 80 degrees

D7E-3

Operating angle

Tilt of 50 to 80 degrees, when the switch is tilted gradually (approx. 1 degree/s) from the horizontal

Returning angle

Tilt of more than 25 degrees, when the switch is tilted gradually (approx. 1 degree/s) from the horizontal

Permissible mounting level

1 degree max. from the horizontal

Contact form

Single pole single throw (NC contact / slow action)

Mounting

Pitch: 30 mm 2 screws (M3)

Height: 5.3 mm

Soldering

Soldering iron: temperature 350 ±10°, 3 sec. max

Ratings

5 VDC, 0.1 mA to 30 VDC, 100 mA (resistive load)

Insulation resistance

100 M

Ω min. (250 VDC, between each terminal of the same polarity)

To measure off condition

Contact resistance

300 m Ohm max. (Initial value)

Vibration during

transportation

Condition: Vibration: 200 gal (1 cycle: 0.5 sec.)

Vibration direction: 2 axial directions

Time: Total 50 hours

Shock

Shock direction: 3 axial directions

Operating temperature and

humidity

Temperature: -25° to +60° (with no icing and condensation)

Humidity: 45 to 95% RH

Storage temperature and

humidity

Temperature: -25° to +60° (with no icing and condensation)

Humidity: 45 to 95% RH protection

Protection

IP67