Microsemi’s products are covered by one or more of U.S. patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583

4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 6,939,743 and foreign patents. US and Foreign patents pending. All Rights Reserved.

DRF200G

The Test Circuit illustrated above was used to evaluate the DRF200 (available as an evaluation Board DRF2XX / EVALSW.) The input control

signal is applied to the DRF200 via IN(1) and SG(2) pins using RG188. This provides excellent noise immunity and control of the signal

ground currents.

The +V

the gate load.

Figure 2, DRF200 Test Circuit